HardLabs

Main Controller PCB V0.1

danielwilczak101·EasyDrift·pcb/Main_Controller_PCB V0.1/Main_Controller_PCB V0.1.kicad_pcb

Main Controller PCB V0.1 layout, top view — open source AVR/Arduino board by danielwilczak101

About the Main Controller PCB V0.1

Main Controller PCB V0.1 is an open source AVR/Arduino PCB design by danielwilczak101, published on GitHub. It is a 2-layer board measuring 75.9 × 57.4 mm, with 12 components from 10 distinct parts.

Its main chip is the ARDUINO_NANO_V3.X, from the AVR/Arduino family. By type, the board carries 8 connectors, 2 capacitors and 1 module.

From the project

ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

Main components on the Main Controller PCB V0.1

ARDUINO_NANO_V3.X

Main Controller PCB V0.1 bill of materials (BOM)

12 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ARDUINO_NANO_V3.X
Arduino_Nano_v3.x
A1
2
Pwr/Coms
J1, J2
1
LED
J3
1
Foot Pedal
J4
1
Pedal PWM
J5
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J6
2
8P8C
J7, J8
1
LM78M05CDTX_NOPB
VR1
1
0.33 uF
C1
1
0.1UF
0.1uF
C2

Main Controller PCB V0.1 design files

The KiCad project lives in the danielwilczak101/EasyDrift repository on GitHub; these links point at the commit this page was built from.

Main Controller PCB V0.1: common questions

What microcontroller does the Main Controller PCB V0.1 use?

The Main Controller PCB V0.1 is built around the ARDUINO_NANO_V3.X, from the AVR/Arduino family.

How big is the Main Controller PCB V0.1?

The Main Controller PCB V0.1 measures 75.9 × 57.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main Controller PCB V0.1?

12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Main Controller PCB V0.1 design files?

From the danielwilczak101/EasyDrift repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Main Controller PCB V0.1 design in my own project?

The repository has no license, so all rights stay with danielwilczak101. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main Controller PCB V0.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in EasyDrift

Similar boards