HardLabs

CC PCB V1

danielwilczak101·EasyDrift·pcb/AutonomousCC/CC_Brain_V1/CC_PCB_V1.kicad_pcb

CC PCB V1 layout, top view — open source RP2040/RP2350 board by danielwilczak101

About the CC PCB V1

CC PCB V1 is an open source RP2040/RP2350 PCB design by danielwilczak101, published on GitHub. It is a 2-layer board measuring 104.2 × 144.9 mm, with 33 components from 20 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the LM337_TO3. By type, the board carries 9 connectors, 6 diodes, 6 resistors, 4 transistors, 2 ICs and 2 relays.

From the project

ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.

Main components on the CC PCB V1

PicoLM337_TO3

CC PCB V1 bill of materials (BOM)

33 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pico
U1
1
LM337_TO3
U2
2
PC817A
Q1, Q2
2
BC547A
Q3, Q4
1
Screw_Terminal_01x07
J1
1
Antenna_Conn_02x04_Odd_Even
J2
1
USB1130-15-A_REVA
J3
2
Conn_01x02_Male
J4, J9
1
Relay_Conn_01x06
J5
1
SCREW_TERMINAL_01X02
Conn_01x02_Male
J6
1
8P8C
Linear Actuator Power
J7
1
8P8C
Linear Actuator
J8
2
FINDER-40.11
K1, K2
2
282837-2
Screw_Terminal1, Screw_Terminal2
1
SMD LED1
D1
3
SMD LED2
D2, D5, D6
2
DIODE
D3, D4
1
CP
C1
1
0.1UF
C
C2
6
1k
R1, R2, R3, R4, R5, R6

CC PCB V1 design files

The KiCad project lives in the danielwilczak101/EasyDrift repository on GitHub; these links point at the commit this page was built from.

CC PCB V1: common questions

What microcontroller does the CC PCB V1 use?

The CC PCB V1 is built around the Pico, from the RP2040/RP2350 family.

How big is the CC PCB V1?

The CC PCB V1 measures 104.2 × 144.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CC PCB V1?

33 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CC PCB V1 design files?

From the danielwilczak101/EasyDrift repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CC PCB V1 design in my own project?

The repository has no license, so all rights stay with danielwilczak101. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CC PCB V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in EasyDrift

Similar boards