SodaIDE v2 patola case
Danjovic·Soda-IDE·hardware/V2/SodaIDE_v2_patola_case/SodaIDE_v2_patola_case.kicad_pcb
About the SodaIDE v2 patola case PCB
SodaIDE v2 patola case is an open source PCB design by Danjovic, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 100 × 64.7 mm, with 30 components from 20 distinct parts.
Other key parts include the 27C512, 74HCT32, 74HCT74, 74HCT138 and 74HC245. By type, the board carries 7 resistors, 6 capacitors, 5 ICs, 4 connectors, 4 jumpers and 1 transistor.
It belongs with the retro computing designs in this gallery.
From the project
8 bit Compact Flash Interface for MSX computers

Main components on the SodaIDE v2 patola case
SodaIDE v2 patola case bill of materials (BOM)
30 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27C512 | DIP-28_W15.24mm | U1 |
| 1 | 74HCT32 | DIP-14_W7.62mm | U2 |
| 1 | 74HCT74 | DIP-14_W7.62mm | U3 |
| 1 | 74HCT138 | DIP-16_W7.62mm | U4 |
| 1 | 74HC245 | DIP-20_W7.62mm | U5 |
| 1 | BC548 | TO-92_Inline | Q1 |
| 1 | MSX_SLOT_CON | MSXCART | CN1 |
| 1 | Conn_02x22_Odd_Even | PinHeader_2x22_P2.00mm_Horizontal | J1 |
| 1 | PINHD-02x20 | PinHeader_2x20_P2.54mm_Horizontal | J2 |
| 1 | Conn_CF_Card | CF-Card_3M_N7E50-E516xx-30 | J3 |
| 1 | PIN_1x3 | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 3 | Jumper_2_Small_Open | PinHeader_1x02_P2.54mm_Vertical | JP2, JP3, JP4 |
| 1 | SW_Push_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | + | LED_D3.0mm | LD1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 5 | 100nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5 |
| 1 | 100uF | CP_lying | C6 |
| 4 | 4K7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R6 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R7 |
SodaIDE v2 patola case design files
The KiCad project lives in the Danjovic/Soda-IDE repository on GitHub; these links point at the commit this page was built from.
SodaIDE v2 patola case: common questions
How big is the SodaIDE v2 patola case PCB?
The SodaIDE v2 patola case measures 100 × 64.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SodaIDE v2 patola case?
30 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the SodaIDE v2 patola case design files?
From the Danjovic/Soda-IDE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SodaIDE v2 patola case design in my own project?
Yes, under the terms of its CC0-1.0 license, which Danjovic chose for the repository.
More boards in Soda-IDE
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k