62 open source boards using the 74HCT74

Real designs built with the 74HCT74, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

62 boardsClear filters|Most starred

How designs wire the 74HCT74

Read from the KiCad layouts of 49 open source designs, one per repository: what each pin of the 74HCT74 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 33 of 49 designs, most often 100 nF (then 1 µF).
GNDpin 7Connected to: GND 94%
VCCpin 14Connected to: VCC 88%
  • Decoupling capacitor on 67% · 100 nF (35), 1 µF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Amiga 2000 EATX by jasonsbeer, Isa8 backplane by skiselev and Rc2014-ym2149 by electrified.

The 74HCT74 in open source designs

The gallery holds 62 open source boards using the 74HCT74 from 49 GitHub repositories; a typical one measures about 138.3 × 100 mm and carries around 60 components.

76% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

Microcontrollers on boards using the 74HCT74

74HCT74: common questions

Where can I find a 74HCT74 reference design?

Each of the 62 boards on this page is a real design using the 74HCT74. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT74 VCC pin?

The VCC pin has a decoupling capacitor on 33 of 49 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 49 open source designs using the 74HCT74.

What parts are used alongside the 74HCT74?

The 74HCT04, 74HCT138, 74HCT00, 74HCT32 and 74HCT14 appear in the most repositories here.

Which microcontrollers do boards using the 74HCT74 use?

Most are built on AVR/Arduino (3) and RP2040/RP2350 (1).

How big is a typical board using the 74HCT74?

The median is 138.3 × 100 mm, and 76% are two-layer designs.

What is the most popular open source board using the 74HCT74?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the 74HCT74 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part