Breakout BQ25570 Cap
About the Breakout BQ25570 Cap
Breakout BQ25570 Cap is an open source PCB design by danstiner, published on GitHub. It is a 2-layer board measuring 32 × 26 mm, with 30 components from 19 distinct parts.
Other key parts include the BQ25570. By type, the board carries 3 diodes, 2 connectors, 1 IC, 1 switch and 1 resistor.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
Main components on the Breakout BQ25570 Cap
Breakout BQ25570 Cap bill of materials (BOM)
30 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25570 | QFN50P350X350X100-21N | U1 |
| 1 | Conn_Breadboard | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | EXCAP | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 2 | 4.7u | C_0603_1608Metric | CIN1, CSTOR1 |
| 3 | 0.1u | C_0402_1005Metric | CIN2, COUT2, CSTOR2 |
| 1 | 47u | C_0603_1608Metric | COUT1 |
| 1 | 0.01u | C_0402_1005Metric | CREF1 |
| 6 | 100u | C_1206_3216Metric | C_BAT1, C_BAT2, C_BAT3, C_BAT4, C_BAT5, C_BAT6 |
| 1 | 22u | L_Bourns-SRN4018 | LBOOST1 |
| 1 | 10u | L_1008_2520Metric | LBUCK1 |
| 1 | 3.57M 1% | R_0603_1608Metric | ROK1 |
| 1 | 2.32M 1% | R_0603_1608Metric | ROK2 |
| 1 | 7.50M 1% | R_0603_1608Metric | ROK3 |
| 2 | 4.32M 1% | R_0603_1608Metric | ROV1, RVO2 |
| 2 | 8.66M 1% | R_0603_1608Metric | ROV2, RVO1 |
| 1 | SKRKAHE020 Test Alps Alpine | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 2 | BPW34-SMD | Osram_BPW34S-SMD | D1, D2 |
| 1 | PWRLED | LED_0603_1608Metric | D3 |
| 1 | 2k | R_0603_1608Metric | R4 |
Breakout BQ25570 Cap design files
The KiCad project lives in the danstiner/embedded repository on GitHub; these links point at the commit this page was built from.
Breakout BQ25570 Cap: common questions
How big is the Breakout BQ25570 Cap?
The Breakout BQ25570 Cap measures 32 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout BQ25570 Cap?
30 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breakout BQ25570 Cap design files?
From the danstiner/embedded repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breakout BQ25570 Cap design in my own project?
The repository has no license, so all rights stay with danstiner. Use it as a reference, and ask the author before reusing the design.
More boards in embedded
ESP32Soily
25 × 129.5 mm38 parts2LNo license0
Nordic nRFBL54L15μ DevKit
25.4 × 43.2 mm32 parts4LNo license0
Breakout NEH7100 Cap
32 × 26 mm24 parts2LNo license0
Nordic nRFBL54L15μ Hygrometer
48 × 48 mm19 parts2LNo license0
Breakout FDC2112
26 × 18 mm17 parts2LNo license0
Breakout FDC2212
26 × 17.9 mm17 parts2LNo license0
SoilProbe FDC1004 Parallel9mm
11.9 × 78.8 mm11 parts2LNo license0
SWD USBC InlineAdapter
17.8 × 27.5 mm10 parts4LNo license0
Breakout FDC1004
26 × 18 mm10 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k