10 open source boards using the BQ25570
Real designs built with the BQ25570, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main board
TUDSSL
98 × 128 mm117 parts2LMIT285Power-Over-Skin-Hardware
kongmunist
15 × 10.8 mm21 parts2LCC-BY-NC-4.055LoRa Pinze Sent
ISS-Lab-Unibo
107 × 51 mm212 parts6LNo license0STM32
Blinky
rcls
50 × 50 mm83 parts4LNo license0BQ2r2
bootchk
13.5 × 12.8 mm10 parts2LNo license0- schematic only · 29 parts
SmartPot RAK3172
MaxBarbe
29 partsNo license0 SolarCell+Y
spacecraft-design-lab-2019
50 × 50 mm49 parts4LNo license12Breakout BQ25570 Cap
danstiner
32 × 26 mm30 parts2LNo license0PWR
Ironman-007
40 × 46.2 mm36 parts2LNo license1Nordic nRF
ThermoGlyph — Wearable Thermal-Tactile Display
jayis1
60 × 45 mm10 parts4LNo license0
How designs wire the BQ25570
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the BQ25570 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN_DC pin has a capacitor to GND on 7 of 7 designs, most often 4.7 µF (then 100 nF).
- The VREF_SAMP pin has a capacitor to GND on 7 of 8 designs, most often 10 nF.
- The VRDIV pin has a series resistor on 7 of 8 designs, most often 7.5 MΩ (then 8.25 MΩ).
- The VOUT_SET pin has a series resistor on 7 of 7 designs, most often 8.25 MΩ (then 6.8 MΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1, 9, 15, 17, 21 | Connected to: GND 97% | — |
| VIN_DCpin 2 | Connected to: A connector 43% · VIN 43% |
|
| VOC_SAMPpin 3 | Connected to: Signal 88% |
|
| VREF_SAMPpin 4 | Connected to: Signal 63% · VREF 25% |
|
| ENpin 5 | Connected to: GND 71% · a signal 29% | — |
| VOUT_ENpin 6 | Connected to: Signal 88% |
|
| VBAT_OVpin 7 | Connected to: Signal 57% · VBAT_OV 43% |
|
| VRDIVpin 8 | Connected to: Signal 88% |
|
| OK_HYSTpin 10 | Connected to: Signal 86% |
|
| OK_PROGpin 11 | Connected to: Signal 86% |
|
| VOUT_SETpin 12 | Connected to: Signal 100% |
|
| VBAT_OKpin 13 | Connected to: VBAT_OK 71% | — |
| VOUTpin 14 | Connected to: A connector 29% · VDD_MCU_LRA 29% |
|
| LBUCKpin 16 | Connected to: Signal 100% |
|
| VBATpin 18 | Connected to: VBAT 86% |
|
| VSTORpin 19 | Connected to: Signal 100% |
|
| LBOOSTpin 20 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power-Over-Skin-Hardware by kongmunist, SolarCell+Y by spacecraft-design-lab-2019, PWR by Ironman-007 and BQ2r2 by bootchk.
The BQ25570 in open source designs
The gallery holds 10 open source boards using the BQ25570 from 10 GitHub repositories; a typical one measures about 50 × 46.2 mm and carries around 33 components.
56% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Main board by TUDSSL.
Microcontrollers on boards using the BQ25570
What boards using the BQ25570 are built for
BQ25570: common questions
Where can I find a BQ25570 reference design?
Each of the 10 boards on this page is a real design using the BQ25570. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ25570 VIN_DC pin connected?
The VIN_DC pin has a capacitor to GND on 7 of 7 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the BQ25570.
How is the BQ25570 VREF_SAMP pin connected?
The VREF_SAMP pin has a capacitor to GND on 7 of 8 designs, most often 10 nF. Counted from the KiCad layouts of 8 open source designs using the BQ25570.
What resistor goes on the BQ25570 VRDIV pin?
The VRDIV pin has a series resistor on 7 of 8 designs, most often 7.5 MΩ (then 8.25 MΩ). Counted from the KiCad layouts of 8 open source designs using the BQ25570.
Which microcontrollers do boards using the BQ25570 use?
Most are built on Nordic nRF (1) and STM32 (1).
How big is a typical board using the BQ25570?
The median is 50 × 46.2 mm, and 56% are two-layer designs.
What is the most popular open source board using the BQ25570?
By GitHub stars, Main board by TUDSSL, with 285 stars.
Can I simulate one of these boards using the BQ25570 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.