Board2 monitor
About the Board2 monitor PCB
Board2 monitor is an open source PCB design by DashiellRussell, published on GitHub. It is a 4-layer board measuring 76 × 90 mm, with 83 components from 10 distinct parts.
Other key parts include the IS31FL3731-SA. By type, the board carries 72 diodes, 4 connectors, 3 capacitors, 2 resistors, 1 IC and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
AURC Battery Management System (KiCad)
Battery Management System for AURC (Australian Universities Rocket Competition). Four-channel battery board set feeding two flight computers (FC1, FC2) and two pyro boards. KiCad 10 project set.
Each boardN/ is an independent KiCad project (.kicadpro / .kicadsch / .kicadpcb) with its own sym-lib-table + fp-lib-table that resolve the shared library at ../libs/ under the nickname BMS. Add a part once in libs/; all three boards see it.
Main components on the Board2 monitor
Board2 monitor bill of materials (BOM)
83 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IS31FL3731-SA | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 2 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J4 |
| 1 | WAKE | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 72 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +64 |
| 2 | 1uF | C_0805_2012Metric | C1, C2 |
| 1 | 0.1uf | C_0805_2012Metric | C3 |
| 1 | 10K | R_0805_2012Metric | R1 |
| 1 | 20K | R_0805_2012Metric | R2 |
Board2 monitor design files
The KiCad project lives in the DashiellRussell/aurc-bms repository on GitHub; these links point at the commit this page was built from.
Board2 monitor: common questions
How big is the Board2 monitor PCB?
The Board2 monitor measures 76 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Board2 monitor?
83 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board2 monitor design files?
From the DashiellRussell/aurc-bms repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Board2 monitor design in my own project?
The repository has no license, so all rights stay with DashiellRussell. Use it as a reference, and ask the author before reusing the design.
More boards in aurc-bms
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k