Q-Throttle repo
DavidMFlynn·Q-Throttle-repo·PCB Rev A/Q-Throttle.kicad_pcb
About the Q-Throttle repo PCB
Q-Throttle repo is an open source PCB design by DavidMFlynn, published on GitHub. It is a 2-layer board measuring 167.6 × 127 mm, with 173 components from 63 distinct parts.
Other key parts include the SP3485CN, LM6132A, 74LS125_(3V3), LM2677-12 and MB85RC256V. By type, the board carries 57 resistors, 43 capacitors, 29 diodes, 16 ICs, 15 transistors and 7 connectors.
From the project
Model railroad throttle
Main components on the Q-Throttle repo
Q-Throttle repo bill of materials (BOM)
173 components, 63 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SP3485CN | SO-8 | U1 |
| 1 | LM6132A | DIP-8_W7.62mm | U2 |
| 1 | 74LS125_(3V3) | DIP-14_W7.62mm | U3 |
| 1 | LM2677-12 | TO-220-7C_w_heatsink | U4 |
| 1 | MB85RC256V | SOIJ-8_5.3x5.3mm_Pitch1.27mm | U5 |
| 1 | 74HCT04 | DIP-14_W7.62mm | U6 |
| 1 | LM358 | DIP-8_W7.62mm | U7 |
| 1 | PIC16(L)F1938-I/SP | DIP-28_W7.62mm | U8 |
| 1 | 74LS08 | DIP-14_W7.62mm | U9 |
| 1 | LM7805CT | TO-220 | U10 |
| 2 | LM555CN | DIP-8_W7.62mm | U11, U13 |
| 2 | IR2102 | DIP-8_W7.62mm_LongPads | U12, U14 |
| 1 | LM78Lxx | TO-92_Molded_Narrow_Oval | U15 |
| 1 | XBee_S1 | XBee | U17 |
| 10 | 2N7000 | TO-92_Molded_Narrow | Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +2 |
| 1 | Q_PMOS_GDS | TO-263-3Lead | Q3 |
| 4 | N-Ch TO-263 | TO-263-3Lead | Q11, Q12, Q13, Q14 |
| 1 | CONN_01X08 | TerminalBlock_Pheonix_MKDS1.5-8pol | J1 |
| 1 | RJ-11 | RJ12_E | J2 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05 | J3 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X06 | Pin_Header_Straight_1x06 | J4 |
| 1 | CONN_01X12 | IDC_Header_Straight_12pins | J5 |
| 2 | CONN_01X04 | Pin_Header_Straight_1x04 | J6, J7 |
| 1 | FUSE | Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | 5KΩ | Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV1 |
| 1 | 1KΩ | Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV2 |
| 1 | SW_PUSH | SW_SPST_PTS645 | SW1 |
| 10 | SBL845 | Diode_TO-220_Vertical | D1, D2, D3, D4, D5, D7, D20, D21 +2 |
| 5 | 1N4148 | Diode_DO-35_SOD27_Horizontal_RM10 | D6, D16, D17, D23, D24 |
| 9 | LED | LED-3MM | D8, D9, D10, D11, D12, D13, D15, D19 +1 |
| 2 | B140 Fast | SMA_Handsoldering | D14, D22 |
| 2 | SMA 15V | SMA_Handsoldering | D18, D25 |
| 1 | 1N4007 | SMA_Handsoldering | D28 |
| 1 | 33uH | Choke_Toroid_12x24mm_Vertical | L1 |
| 1 | 100uH | Choke_Toroid_12x24mm_Vertical | L2 |
| 22 | 0.1uf | C_0805_HandSoldering | C1, C2, C3, C6, C9, C10, C12, C13 +14 |
| 1 | 1000uF 50v | CP_Radial_D17.0mm_P7.50mm | C4 |
| 3 | 15uF 50v | C_Radial_D6.3_L11.2_P2.5 | C5, C7, C8 |
| 1 | 0.47uF 50v | C_Radial_D6.3_L11.2_P2.5 | C11 |
| 3 | 0.01uf | C_0805_HandSoldering | C17, C31, C40 |
| 2 | 220uF 50v | C_Radial_D10_L13_P5 | C19, C20 |
| 2 | 2.2uF 25v | C_Radial_D5_L11_P2 | C22, C42 |
| 1 | 1000uF 25v | CP_Radial_D17.0mm_P7.50mm | C24 |
| 1 | 100uf 50v | C_Radial_D8_L11.5_P3.5 | C27 |
| 2 | 0.001uf | C_0805_HandSoldering | C29, C37 |
| 2 | 1uf poly | C_Rect_L7_W2.5_P5 | C30, C38 |
| 2 | 6.8uF 35v Tant | C_Radial_D5_L6_P2.5 | C34, C41 |
| 1 | 0.1 uf | C_0805_HandSoldering | C43 |
| 2 | 4.7M | R_0805_HandSoldering | R1, R2 |
| 5 | 47Ω | R_0805_HandSoldering | R3, R44, R45, R53, R54 |
| 13 | 10K | R_0805_HandSoldering | R4, R5, R6, R10, R11, R15, R17, R20 +5 |
| 4 | 4.7K | R_0805_HandSoldering | R7, R8, R13, R21 |
| 1 | 100Ω | R_0805_HandSoldering | R9 |
| 19 | 1K | R_0805_HandSoldering | R12, R14, R16, R25, R28, R29, R31, R33 +11 |
| 4 | 100K | R_0805_HandSoldering | R18, R19, R34, R50 |
| 1 | 1.5K | R_0805_HandSoldering | R22 |
| 1 | 2.2K | R_0805_HandSoldering | R26 |
| 1 | 470Ω | R_0805_HandSoldering | R30 |
| 2 | 10Ω | R_0805_HandSoldering | R32, R46 |
| 1 | 0.1Ω | R_2512_HandSoldering | R49 |
| 1 | 10.0K | R_0805_HandSoldering | R51 |
| 1 | 1.00K | R_0805_HandSoldering | R52 |
| 1 | 200Ω | R_0805_HandSoldering | R55 |
Q-Throttle repo design files
The KiCad project lives in the DavidMFlynn/Q-Throttle-repo repository on GitHub; these links point at the commit this page was built from.
Q-Throttle repo: common questions
How big is the Q-Throttle repo PCB?
The Q-Throttle repo measures 167.6 × 127 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Q-Throttle repo?
173 components, from 63 distinct parts. The full bill of materials is listed on this page.
Where can I download the Q-Throttle repo design files?
From the DavidMFlynn/Q-Throttle-repo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Q-Throttle repo design in my own project?
The repository has no license, so all rights stay with DavidMFlynn. Use it as a reference, and ask the author before reusing the design.