Educational staircase
davidzindovic·Educational-staircase·Hardware/Koracni ksilofon.kicad_pcb
About the Educational staircase PCB
Educational staircase is an open source ESP32 PCB design by davidzindovic, published on GitHub. It is a 2-layer board measuring 55.2 × 117.9 mm, with 51 components from 20 distinct parts.
Its main chip is the ESP32 M3, from the ESP32 family. Other key parts include the 4051. By type, the board carries 24 connectors, 7 ICs, 5 resistors, 4 jumpers, 4 capacitors and 3 switches.
It belongs with the audio, iot & wireless and sensors designs in this gallery.
From the project
A project for an educational stairway enhancment, which consists of sensor for tracking the steps on stairs. Walking on stairs triggers audio and video effects.

Main components on the Educational staircase
Educational staircase bill of materials (BOM)
51 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 4051 | DIP-16_W7.62mm | U1, U2, U3, U4, U5, U6, U7 |
| 14 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J1, J2, J3, J4, J5, J6, J7, J8 +6 |
| 2 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J15, J16 |
| 1 | Serial Jumper | PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | Flash Jumper | PinHeader_1x02_P2.54mm_Vertical | J18 |
| 2 | Conn_01x18_Socket | PinSocket_1x18_P2.54mm_Vertical | J19, J20 |
| 1 | 5V jumper | PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | 3V3 jumper | PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | AudioJack2_Ground_Switch | Audio jack connector | J23 |
| 1 | Power input | TerminalBlock_bornier-3_P5.08mm | J26 |
| 4 | ESP32 M3 | M3 luknja | H1, H2, H3, H4 |
| 4 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | Volume up | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Volume down | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 3 | 0.1uF | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3 |
| 1 | C_Polarized | CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | backup | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5, R6 |
| 1 | backup za analog | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Educational staircase design files
The KiCad project lives in the davidzindovic/Educational-staircase repository on GitHub; these links point at the commit this page was built from.
Educational staircase: common questions
What microcontroller does the Educational staircase use?
The Educational staircase is built around the ESP32 M3, from the ESP32 family.
How big is the Educational staircase PCB?
The Educational staircase measures 55.2 × 117.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Educational staircase?
51 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Educational staircase design files?
From the davidzindovic/Educational-staircase repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Educational staircase design in my own project?
The repository has no license, so all rights stay with davidzindovic. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Educational staircase without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k