44 open source boards using the 4051
Real designs built with the 4051, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956Kivu12
ohmtech-rdi
59.6 × 109.5 mm135 parts2LCC-BY-SA-4.0405AVR/Arduino
PLC-14500
nicolacimmino
160.1 × 101 mm160 parts2LGPL-3.069Klangorium
hexagon5un
200 × 100 mm152 parts2LNo license65Kaseta
zlosynth
99.1 × 109.2 mm70 parts2LCC-BY-SA-4.058RP2040/RP2350
GuitarPico
profdc9
100 × 100 mm127 parts2LNo license49AVR/Arduino
Keyman64
hbekel
80 × 64.7 mm29 parts2LGPL-3.018AVR/Arduino
OpenHarrierUFC
OpenHarrier
144 × 158 mm91 parts2LGPL-3.013RP2040/RP2350
TrebleSynth
profdc9
236 × 128 mm210 parts2LNo license11Tap o matic
cormallen
120.7 × 108 mm64 parts2LCC-BY-NC-4.011TapeLooper MainBoard
TheSlowGrowth
119.6 × 106.5 mm243 parts2LCustom license10CTA control board
PySpice-org
252 × 152 mm614 parts4LNo license9AVR/Arduino
Alpha.ctrl
banjomasterpete
265 × 200 mm113 parts2LMIT6AVR/Arduino
Nova 1200 front panel
ForgottenMachines
397.5 × 119.4 mm203 parts2LNo license5Atari65 130XE C070067
jimbro1000
323.9 × 204 mm327 parts4LNo license4ESPTINY86 Stompbox
dusjagr
54.8 × 106.4 mm20 parts2LApache-2.03Tc69
sadaoikebe
307.2 × 115.5 mm98 parts2LMIT2Arduino weatherstation
AGVOLUTION
125 × 85 mm64 parts2LNo license2STM32
CommonSlotPSU TouchScreenController HW
cracked-machine
124 × 100 mm49 parts2LNo license2RP2040/RP2350
TrebleSynth
sinitsinmike
236 × 128 mm210 parts2LNo license1AVR/Arduino
Main
qweqq
158.8 × 65.7 mm116 parts2LMIT1OAM Time Machine
patamari
74.9 × 152.4 mm94 parts2LNo license1Sardinia
dominicfrugoli
241.3 × 139.7 mm93 parts4LNo license11802-Mini-1854-Serial
dmadole
100 × 100 mm44 parts2LNo license1Analog multiplexer-8x8
ellisgl
60.6 × 92.7 mm26 parts2LBSD-3-Clause1AVR/Arduino
Titan67j60
Lehman3065
191 × 123 mm242 parts2LNo license0RP2040/RP2350
Base18
M-o-a-T
140.4 × 84.9 mm162 parts2LNo license0Kivu12
GKeyMaster
59.6 × 109.5 mm135 parts2LCC-BY-SA-4.00ESP32
Educational staircase
davidzindovic
55.2 × 117.9 mm51 parts2LNo license0ESP8266
Monitor solar v3
Laboratorio-Robotica-UTN-Fra
100 × 50 mm40 parts2LNo license0Xfaders
essigt
100.3 × 57.2 mm27 parts2LNo license11Analog2.0 analog sequencer
mkomakonkon
207.5 × 152.5 mm142 parts2LNo license5MetaphoricKBV2
OldWer
268.5 × 138 mm76 parts2LCC0-1.05Keyboard
Fred72z
272.2 × 107.8 mm62 partsGPL-2.05Oric-PS2USB
Board-Folk
85.7 × 92.5 mm10 parts2LNo license4PIC
Trigger seq
elmegil
74.5 × 104.6 mm60 parts2LMIT0
How designs wire the 4051
Read from the KiCad layouts of 42 open source designs, one per repository: what each pin of the 4051 connects to, and the resistors, capacitors and other passives placed on it.
- The VEE pin is tied to GND on 40 of 42 designs (-5V on 2).
- The INH pin is tied to GND on 36 of 42 designs (a signal on 6).
- The VDD pin has a decoupling capacitor on 24 of 42 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INHpin 6 | Connected to: GND 86% | — |
| VEEpin 7 | Connected to: GND 95% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| VDDpin 16 | Connected to: 5V 93% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDeck r3.1.2 by shanteacontrols, Kivu12 by ohmtech-rdi, PLC-14500 by nicolacimmino and Klangorium by hexagon5un.
The 4051 in open source designs
The gallery holds 44 open source boards using the 4051 from 42 GitHub repositories; a typical one measures about 120.1 × 105.5 mm and carries around 84 components.
93% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is OpenDeck r3.1.2 by shanteacontrols.
Parts used alongside the 4051
Microcontrollers on boards using the 4051
What boards using the 4051 are built for
4051: common questions
Where can I find a 4051 reference design?
Each of the 44 boards on this page is a real design using the 4051. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4051 VEE pin connected?
The VEE pin is tied to GND on 40 of 42 designs (-5V on 2). Counted from the KiCad layouts of 42 open source designs using the 4051.
How is the 4051 INH pin connected?
The INH pin is tied to GND on 36 of 42 designs (a signal on 6). Counted from the KiCad layouts of 42 open source designs using the 4051.
What decoupling capacitors do designs use on the 4051 VDD pin?
The VDD pin has a decoupling capacitor on 24 of 42 designs, most often 100 nF. Counted from the KiCad layouts of 42 open source designs using the 4051.
What parts are used alongside the 4051?
The LM358, LM7805_TO220, Pico, TL072 and AZ1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the 4051 use?
Most are built on AVR/Arduino (7), RP2040/RP2350 (5), STM32 (2) and ESP32 (1).
How big is a typical board using the 4051?
The median is 120.1 × 105.5 mm, and 93% are two-layer designs.
What is the most popular open source board using the 4051?
By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the 4051 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.