Tube Amp Aux Module
davw4453·Tube-Amplifier-Project·EDAFiles/KiCAD_SCH/auxModule/auxModule/auxModule.kicad_pcb
About the Tube Amp Aux Module
Tube Amp Aux Module is an open source PCB design by davw4453, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 85.6 × 54 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
This is a vacuum tube amplifier with modular input modules to provide for different audio source methods. This project was designed for my captsone project at CCSU.
1. Have the mainboard and aux input module manufactured at your fab house of choice (JLCPCB, OshPark, etc.).
Mainboard Gerbers: EDAFiles/KiCADSCH/tubeAmp/gerbers/ Aux Module Gerbers: EDAFiles/KiCADSCH/auxModule/auxModule/gerbers/
2. Assemble the PCBs according to the component designators in the BOM: BOM/tubeAmp_BOM.ods
3. 3D print the case and lid. You can load tubecase.stl and tubecase-lid.3MF into a slicer and print in the material of choice. (I used BambuStudio and printed in clear PLA). The .3mf files are the BambuStudio project files. The .sldprt and .slddrw files are Solidworks CAD…
Tube Amp Aux Module bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STX-3000 | STX-3000_KYC | J1 |
| 1 | 6130XX243121_613010243121 | 613010243121_10pin | J2 |
| 2 | 1K, 1/4W | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Tube Amp Aux Module design files
The KiCad project lives in the davw4453/Tube-Amplifier-Project repository on GitHub; these links point at the commit this page was built from.
Tube Amp Aux Module: common questions
How big is the Tube Amp Aux Module?
The Tube Amp Aux Module measures 85.6 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tube Amp Aux Module?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tube Amp Aux Module design files?
From the davw4453/Tube-Amplifier-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tube Amp Aux Module design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in Tube-Amplifier-Project
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687