Kicad intro

dBarmpxkos·kicad_intro·kicad_intro/kicad-intro/kicad-intro.kicad_pcb

Kicad intro PCB layout, top view — open source ESP32 board by dBarmpxkos

About the Kicad intro PCB

Kicad intro is an open source ESP32 PCB design by dBarmpxkos, published on GitHub. It is a 2-layer board measuring 116 × 79 mm, with 10 components from 7 distinct parts.

Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 7 resistors, 2 ICs and 1 transistor.

Main components on the Kicad intro

Kicad intro bill of materials (BOM)

10 components, 7 distinct parts.

QtyPartRefs
1
~
U1
1
ESP32-S3-DevKitC
U2
1
AO3400A
AOS
Q1
1
RC0603FR-0710KL
YAGEO(国巨)
R1
1
0603WAF2200T5E
UNI-ROYAL(厚声)
R2
3
Pt100
R3, R4, R5
2
PTFR0603Q3K30V9
RESI(开步睿思)
R6, R7

Kicad intro design files

The KiCad project lives in the dBarmpxkos/kicad_intro repository on GitHub; these links point at the commit this page was built from.

Kicad intro: common questions

What microcontroller does the Kicad intro use?

The Kicad intro is built around the ESP32-S3-DevKitC, from the ESP32 family.

How big is the Kicad intro PCB?

The Kicad intro measures 116 × 79 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad intro?

10 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad intro design files?

From the dBarmpxkos/kicad_intro repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad intro design in my own project?

The repository has no license, so all rights stay with dBarmpxkos. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicad intro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards