USB power serial breakout
About the USB power serial breakout
USB power serial breakout is an open source PCB design by dbuchwald, published on GitHub under the MIT license. It is a 2-layer board measuring 53.3 × 26.7 mm, with 20 components from 14 distinct parts.
Other key parts include the FT230XS. By type, the board carries 6 capacitors, 5 resistors, 4 connectors, 3 diodes, 1 IC and 1 inductor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Simple designs in KiCAD that do not require separate projects
Main components on the USB power serial breakout
USB power serial breakout bill of materials (BOM)
20 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT230XS | SSOP-16_4.4x5.2mm_P0.65mm | U1 |
| 2 | Mount2 | PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J3 |
| 1 | UART | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | TX | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | RX | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | PWR | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | FBS | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | FB1 |
| 1 | 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 2 | 47pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 1 | 4,7uF | CP_Radial_D4.0mm_P2.00mm | C6 |
| 2 | 27 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 3 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5 |
USB power serial breakout design files
The KiCad project lives in the dbuchwald/kicad-simple repository on GitHub; these links point at the commit this page was built from.
USB power serial breakout: common questions
How big is the USB power serial breakout?
The USB power serial breakout measures 53.3 × 26.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB power serial breakout?
20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB power serial breakout design files?
From the dbuchwald/kicad-simple repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USB power serial breakout design in my own project?
Yes, under the terms of its MIT license, which dbuchwald chose for the repository.
More boards in kicad-simple
AVR/ArduinoUPDI programmer
67.3 × 25.4 mm29 parts2LMIT10
SoftPower breakout
44.5 × 53.3 mm17 parts2LMIT10
MicroSD breakout
24.1 × 22.9 mm4 parts2LMIT10
VGA breakout
29.2 × 43.2 mm4 parts2LMIT10
AVRISP10 breakout
17.8 × 17.8 mm3 parts2LMIT10
AVRISP breakout
17.8 × 17.8 mm3 parts2LMIT10
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979