IntegratedLabsProject
ddona19·IntegratedLabsProject·DarioDona/Lecture Practice/STM32 Development Board/STM32 Development Board.kicad_pcb
About the IntegratedLabsProject PCB
IntegratedLabsProject is an open source STM32 PCB design by ddona19, published on GitHub. It is a 4-layer board measuring 33.2 × 55.5 mm, with 46 components from 35 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the MP2359DJ-LF-Z, USBLC6-2SC6, MAX30101EFD and PCM12SMTR. By type, the board carries 16 capacitors, 13 resistors, 5 ICs, 4 diodes, 3 inductors and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Dario Dona project for Integrated Labs
Main components on the IntegratedLabsProject
IntegratedLabsProject bill of materials (BOM)
46 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | MP2359DJ-LF-Z | SOT-23-6 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | MAX30101EFD | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W6.73mm_P2.54mm_LowProfile_JPin | U4 |
| 1 | PCM12SMTR | CP_Elec_CAP-XX_DMF3Zxxxxxxxx3D | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 10118193-0001LF | TerminalBlock_4Ucon_1x11_P3.50mm_Horizontal | J2 |
| 1 | DC-005 | D_SMB_Modified | J8 |
| 1 | 250mA | Fuse_1206_3216Metric | F1 |
| 1 | BLUE | LED_0603_1608Metric | D1 |
| 2 | B5819W | D_SOD-123 | D2, D3 |
| 1 | RED | LED_0603_1608Metric | D4 |
| 1 | 600 @ 600MHz | L_0805_2012Metric | FB1 |
| 1 | 39n | L_0402_1005Metric | L1 |
| 1 | 10u | TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | L2 |
| 1 | 4u7 | C_0603_1608Metric | C1 |
| 2 | 2u2 | C_0603_1608Metric | C2, C4 |
| 5 | 100n | C_0402_1005Metric | C3, C5, C6, C7, C9 |
| 3 | 10u | C_1206_3216Metric | C8, C14, C15 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1u | C_0402_1005Metric | C10 |
| 2 | 12p | C_0402_1005Metric | C11, C13 |
| 1 | 10n | C_0402_1005Metric | C12 |
| 1 | 10n | C_0603_1608Metric | C16 |
| 1 | 1k5 | R_0603_1608Metric | R1 |
| 2 | 2k2 | R_0402_1005Metric | R2, R6 |
| 1 | 100k | R_0603_1608Metric | R3 |
| 1 | 68k | R_0603_1608Metric | R4 |
| 1 | 10k | R_0402_1005Metric | R5 |
| 1 | 47 | R_0402_1005Metric | R7 |
| 1 | 47k | R_0603_1608Metric | R8 |
| 1 | 15k | R_0603_1608Metric | R9 |
| 1 | 270 | R_0603_1608Metric | R10 |
| 1 | 1k | R_0603_1608Metric | R11 |
| 2 | 2k2 | R_0603_1608Metric | R12, R13 |
IntegratedLabsProject design files
The KiCad project lives in the ddona19/IntegratedLabsProject repository on GitHub; these links point at the commit this page was built from.
IntegratedLabsProject: common questions
What microcontroller does the IntegratedLabsProject use?
The IntegratedLabsProject is built around the STM32F405RGT6, from the STM32 family.
How big is the IntegratedLabsProject PCB?
The IntegratedLabsProject measures 33.2 × 55.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IntegratedLabsProject?
46 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the IntegratedLabsProject design files?
From the ddona19/IntegratedLabsProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IntegratedLabsProject design in my own project?
The repository has no license, so all rights stay with ddona19. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IntegratedLabsProject without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k