Universal-Melty-AIO

Dean27817·Universal-Melty-AIO·PCB/AIOMeltyV3.kicad_pcb

Universal-Melty-AIO PCB layout, top view — open source ESP32 board by Dean27817

About the Universal-Melty-AIO PCB

Universal-Melty-AIO is an open source ESP32 PCB design by Dean27817, published on GitHub. It is a 2-layer board measuring 39.7 × 26.2 mm, with 26 components from 12 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the PMEG3005CT,215. By type, the board carries 10 resistors, 7 capacitors, 4 ICs, 2 switches, 2 diodes and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

A repository of code and hardware files for a universal melty board that uses two accelerometers to make a PCB that should be able to work in any meltybrain battlebot.

Main components on the Universal-Melty-AIO

ESP32-S3-MINI-1PMEG3005CT,215

Universal-Melty-AIO bill of materials (BOM)

26 components, 12 distinct parts.

QtyPartRefs
2
~
U1, U2
1
ESP32-S3-MINI-1
U3
1
PMEG3005CT,215
RT9161A-33GV
U4
1
USB4500-03-0-A_REVA1
J1
1
Boot
SW1
1
Reset
SW2
2
CQY99
D1, D2
7
100nf
C1, C2, C3, C4, C5, C12, C13
2
27.4
R1, R2
2
5.1k
R3, R4
4
10k
R5, R6, R9, R10
2
R
R7, R8

Universal-Melty-AIO design files

The KiCad project lives in the Dean27817/Universal-Melty-AIO repository on GitHub; these links point at the commit this page was built from.

Universal-Melty-AIO: common questions

What microcontroller does the Universal-Melty-AIO use?

The Universal-Melty-AIO is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Universal-Melty-AIO PCB?

The Universal-Melty-AIO measures 39.7 × 26.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Universal-Melty-AIO?

26 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Universal-Melty-AIO design files?

From the Dean27817/Universal-Melty-AIO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Universal-Melty-AIO design in my own project?

The repository has no license, so all rights stay with Dean27817. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Universal-Melty-AIO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards