HardLabs

Deets fpv vtx scanner

deets·deets-fpv-vtx-scanner·vtx-scanner-pcb/vtx-scanner-pcb.kicad_pcb

Deets fpv vtx scanner PCB layout, top view — open source ESP32 board by deets

About the Deets fpv vtx scanner PCB

Deets fpv vtx scanner is an open source ESP32 PCB design by deets, published on GitHub. It is a 4-layer board measuring 65.8 × 77.2 mm, with 31 components from 18 distinct parts.

Its main chip is the ESP32-WROVER-I, from the ESP32 family. Other key parts include the RX5808, AMS1117-3.3, oskj-dc-dc and AI-1027-TWT. By type, the board carries 9 resistors, 6 connectors, 4 ICs, 4 switches, 4 capacitors and 3 transistors.

Main components on the Deets fpv vtx scanner

RX5808AMS1117-3.3oskj-dc-dcAI-1027-TWTESP32-WROVER-I

Deets fpv vtx scanner bill of materials (BOM)

31 components, 18 distinct parts.

QtyPartRefs
1
RX5808
U1
1
AMS1117-3.3
U2
1
oskj-dc-dc
U3
1
AI-1027-TWT
U4
1
ESP32-WROVER-I
A1
3
MMSS8050-H-TP
Q1, Q2, Q3
1
SJ-3523-SMT-TR
CON1
1
Conn_01x06_Male
J1
1
sh1106-1.3inch-oled
J2
1
SMA-J-P-H-RA-TH1
J3
1
Conn_01x05
J4
1
XT60-M
J5
4
FSM4JSMATR
S1, S2, S3, S4
2
47uF
C1, C2
1
100nF
C3
1
300nF
C4
8
10K
R1, R2, R4, R5, R6, R7, R8, R9
1
470
R3

Deets fpv vtx scanner design files

The KiCad project lives in the deets/deets-fpv-vtx-scanner repository on GitHub; these links point at the commit this page was built from.

Deets fpv vtx scanner: common questions

What microcontroller does the Deets fpv vtx scanner use?

The Deets fpv vtx scanner is built around the ESP32-WROVER-I, from the ESP32 family.

How big is the Deets fpv vtx scanner PCB?

The Deets fpv vtx scanner measures 65.8 × 77.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Deets fpv vtx scanner?

31 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Deets fpv vtx scanner design files?

From the deets/deets-fpv-vtx-scanner repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Deets fpv vtx scanner design in my own project?

The repository has no license, so all rights stay with deets. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Deets fpv vtx scanner without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards