DaisyPatchSMThingie
Desval27·DaisyPatchSMThingie·hardware/DaisyPatchSMThingie.kicad_pcb
About the DaisyPatchSMThingie PCB
DaisyPatchSMThingie is an open source PCB design by Desval27, published on GitHub under the MIT license. It is a 2-layer board measuring 236.2 × 124.5 mm, with 67 components from 28 distinct parts.
Other key parts include the Daisy_Patch_SM, SSD1306 0.96" OLED I2C and H11L1. By type, the board carries 31 connectors, 9 resistors, 6 switches, 5 capacitors, 4 jumpers and 3 ICs.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
https://electro-smith.com/products/daisy-seed
https://electro-smith.com/products/daisy-seed
This PCB is designed to breakout all the PINs of the Daisy Patch Submodule along with additional components such as push buttons, LEDs, potentiometers, I2C, and SD card interfaces along with enough room for a typical 830 point breadboard.
All 40 Patch Submodule PINs are available via the pin headers on the left hand side of the board. The right hand side contains headers to the various additional components.

Main components on the DaisyPatchSMThingie
DaisyPatchSMThingie bill of materials (BOM)
67 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Daisy_Patch_SM | DAISY_PATCH_SM | U1 |
| 1 | SSD1306 0.96" OLED I2C HS(汉昇) | 0.96 Inch OLED I2C Display Module | U2 |
| 1 | H11L1 | DIP-6_W7.62mm_Socket_LongPads | U3 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | 02x15 PIN CONNECTOR | PinHeader_2x15_P2.54mm_Vertical | J2 |
| 1 | 01x02 PIN CONNECTOR | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PJS008-4100-0-VE Yamaichi PJS008-4100-0-VE | Yamaichi PJS00841000VE | J4 |
| 4 | JST 01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6, J7, J30, J31 |
| 4 | WQP-WQP419GR STEREO 3.5mm Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J8, J9, J24, J27 |
| 18 | WQP-WQP518MA MONO 3.5mm Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J10, J11, J12, J13, J14, J15, J16, J17 +10 |
| 1 | EuroRack_Bus_Connector_10_PIN | IDC-Header_2x05_P2.54mm_Vertical | J32 |
| 2 | Fuse | 65600001409 | F1, F2 |
| 2 | JUMPER | Jumper_2_PTH_SMD_Combo-NO | JP1, JP4 |
| 2 | JUMPER | Jumper_2_PTH_SMD_Combo-NC | JP2, JP3 |
| 4 | 10kΩ | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4 |
| 1 | EG2219 | SW_EG2219 | S1 |
| 1 | EN11C | Rotary Encoder | SW1 |
| 4 | SW_PUSH_6mm | SW_PUSH_6mm | SW2, SW3, SW4, SW5 |
| 2 | RED | LED_D5.0mm_FlatTop | D1, D2 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C4, C5 |
| 2 | 10µF | CP_Radial_D5.0mm_P2.00mm | C2, C3 |
| 2 | 4k7Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 3 | 1kΩ | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R5 |
| 1 | 220Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 270Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11 |
| 1 | 10Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 33Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13 |
DaisyPatchSMThingie design files
The KiCad project lives in the Desval27/DaisyPatchSMThingie repository on GitHub; these links point at the commit this page was built from.
DaisyPatchSMThingie: common questions
How big is the DaisyPatchSMThingie PCB?
The DaisyPatchSMThingie measures 236.2 × 124.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DaisyPatchSMThingie?
67 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the DaisyPatchSMThingie design files?
From the Desval27/DaisyPatchSMThingie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DaisyPatchSMThingie design in my own project?
Yes, under the terms of its MIT license, which Desval27 chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k