DaisySeedThingie

Desval27·DaisySeedThingie·hardware/DaisySeedThingie.kicad_pcb

DaisySeedThingie PCB layout, top view — open source board by Desval27

About the DaisySeedThingie PCB

DaisySeedThingie is an open source PCB design by Desval27, published on GitHub under the MIT license. It is a 2-layer board measuring 236.2 × 124.5 mm, with 61 components from 31 distinct parts.

Other key parts include the DAISY SEED, H11L1 and SSD1306 0.96" OLED I2C. By type, the board carries 23 connectors, 13 resistors, 6 switches, 4 jumpers, 4 diodes and 3 ICs.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

https://electro-smith.com/products/daisy-seed

https://electro-smith.com/products/daisy-seed

This PCB is designed to breakout all the PINs of the Daisy Seed along with additional components such as push buttons, LEDs, potentiometers, I2C, and SD card interfaces along with enough room for a typical 830 point breadboard.

All 40 Daisy PINs are available on both sides of the board with those on the left being mirrored/inverted for additional flexibility.

DaisySeedThingie, from the project README
From the project README

Main components on the DaisySeedThingie

DaisySeedThingie bill of materials (BOM)

61 components, 31 distinct parts.

QtyPartRefs
1
DAISY SEED
U1
1
H11L1
U2
1
SSD1306 0.96" OLED I2C
HS(汉昇)
U3
1
01x02 PIN CONNECTOR
J1
1
DC Barrel Jack
J2
2
02x20 PIN CONNECTOR
J3, J5
1
02x17 PIN CONNECTOR
J4
1
PJS008-4100-0-VE
Yamaichi PJS008-4100-0-VE
J6
1
01x06 PIN CONNECTOR
J7
4
JST 01x03
J8, J9, J18, J19
4
WQP-WQP419GR
STEREO 3.5mm
Wenzhou QingPu Electronics Co
J10, J13, J16, J17
8
WQP-WQP518MA
MONO 3.5mm
Wenzhou QingPu Electronics Co
J11, J12, J14, J15, J20, J21, J22, J23
1
5x20mm
F1
2
JUMPER
JP1, JP4
2
JUMPER
JP2, JP3
4
10kΩ
RV1, RV2, RV3, RV4
1
EG2219
S1
1
EN11C
SW1
4
SW_PUSH_6mm
SW2, SW3, SW4, SW5
2
RED
D1, D2
Show 11 more
QtyPartRefs
1
1N5822
D3
1
1N4148
D4
1
100uF
C1
2
100nF
C2, C3
2
1kΩ
R1, R2
1
220Ω
R3
2
4k7Ω
R4, R6
1
270Ω
R5
5
47kΩ
R7, R8, R9, R10, R11
1
10Ω
R12
1
33Ω
R13

DaisySeedThingie design files

The KiCad project lives in the Desval27/DaisySeedThingie repository on GitHub; these links point at the commit this page was built from.

DaisySeedThingie: common questions

How big is the DaisySeedThingie PCB?

The DaisySeedThingie measures 236.2 × 124.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DaisySeedThingie?

61 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the DaisySeedThingie design files?

From the Desval27/DaisySeedThingie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DaisySeedThingie design in my own project?

Yes, under the terms of its MIT license, which Desval27 chose for the repository.

Similar boards