Buck converter

devikanambiar05·buck_converter_pcb

Buck converter PCB layout, top view — open source board by devikanambiar05

About the Buck converter PCB

Buck converter is an open source PCB design by devikanambiar05, published on GitHub. It is a 2-layer board measuring 83.5 × 48 mm, with 16 components from 13 distinct parts.

Other key parts include the ICM7555xB. By type, the board carries 4 capacitors, 3 connectors, 3 diodes, 2 resistors, 1 IC and 1 transistor.

It belongs with the power & battery designs in this gallery.

From the project

Design and PCB implementation of a DC–DC buck converter using an NE555 timer-based astable multivibrator for PWM generation and an IRFZ44N N-channel MOSFET as a low-side switching element. The project explores PWM-based voltage conversion, power electronics, and custom PCB design.

A step-down (buck) DC-DC converter that uses a 555 timer for PWM and an N-channel MOSFET on the low side, so the 555 drives the gate directly. No gate driver or level shifter is needed. Designed in KiCad 10 as a through-hole, two-layer board for a 12 V input and about 5 V output.

This README also records how the design arrived at this circuit.

- Timer: NE555 in astable mode. - Duty-cycle control: potentiometer with two steering diodes, so the duty cycle (and output voltage) is adjustable while the frequency stays almost constant. - Switch: IRF740 N-MOSFET on the low side, driven from the…

Buck converter, from the project README
From the project README

Main components on the Buck converter

Buck converter bill of materials (BOM)

16 components, 13 distinct parts.

QtyPartRefs
1
ICM7555xB
U1
1
IRF740
Q2
3
Screw_Terminal_01x02
J1, J2, J3
1
R_Potentiometer
RV1
1
1N5822
D1
2
D
D2, D3
1
220u
L1
1
220u
C1
1
1n
C2
1
100n
C3
1
100u
C4
1
100
R1
1
1k
R2

Buck converter design files

The KiCad project lives in the devikanambiar05/buck_converter_pcb repository on GitHub; these links point at the commit this page was built from.

Buck converter: common questions

How big is the Buck converter PCB?

The Buck converter measures 83.5 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Buck converter?

16 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Buck converter design files?

From the devikanambiar05/buck_converter_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Buck converter design in my own project?

The repository has no license, so all rights stay with devikanambiar05. Use it as a reference, and ask the author before reusing the design.

Similar boards