Jeopardy-Buzzers
DevinJM3·Jeopardy-Buzzers·KiCad Files/Jeopardy-Buzzers.kicad_pcb
About the Jeopardy-Buzzers PCB
Jeopardy-Buzzers is an open source RISC-V PCB design by DevinJM3, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 30 mm, with 27 components from 19 distinct parts.
Its main chip is the CH32V003FxUx, from the RISC-V family. Other key parts include the CH340N, NRF24L01_Breakout and AMS1117-3.3. By type, the board carries 7 capacitors, 5 connectors, 5 diodes, 5 resistors, 4 ICs and 1 crystal.
Main components on the Jeopardy-Buzzers
Jeopardy-Buzzers bill of materials (BOM)
27 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003FxUx | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | Crystal_24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Usb-C | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Socket | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x03_Socket | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J5 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 3 | 5.1v | Nexperia_CFP3_SOD-123W | D4, D5, D6 |
| 2 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C7 |
| 2 | 12pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
Jeopardy-Buzzers design files
The KiCad project lives in the DevinJM3/Jeopardy-Buzzers repository on GitHub; these links point at the commit this page was built from.
Jeopardy-Buzzers: common questions
What microcontroller does the Jeopardy-Buzzers use?
The Jeopardy-Buzzers is built around the CH32V003FxUx, from the RISC-V family.
How big is the Jeopardy-Buzzers PCB?
The Jeopardy-Buzzers measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jeopardy-Buzzers?
27 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jeopardy-Buzzers design files?
From the DevinJM3/Jeopardy-Buzzers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Jeopardy-Buzzers design in my own project?
Yes, under the terms of its MIT license, which DevinJM3 chose for the repository.
Can I test firmware for the Jeopardy-Buzzers without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105