Usb c power
devkyber·PCB·examples/usb-c-power/usb-c-power.kicad_pcb
About the Usb c power PCB
Usb c power is an open source PCB design by devkyber, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 8 components from 6 distinct parts.
By type, the board carries 3 resistors, 2 connectors, 2 diodes and 1 fuse.
From the project
AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.
An unbuilt educational DRAFT with independent CC pull-downs, a resettable fuse, a unidirectional TVS, a power LED and a two-pin output. The 60 × 40 mm two-layer board is fully routed. Revision B replaces the original connector with the six-contact, power-only GCT USB4125-GF-A: native ERC and refilled DRC now report zero findings under the unchanged manufacturing rules. Actual assembly, physical fit and hardware behavior remain unqualified.

Usb c power bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB4125-GF-A GCT | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | HTSW-102-07-G-S Fused 5 V OUT Samtec | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | MF-MSMF075-2 PPTC 0.75 A Bourns | MF-MSMF075_1812_Style1 | F1 |
| 1 | SMAJ6.0A Vishay | D_SMA | D1 |
| 1 | WP710A10ID Kingbright | LED_D3.0mm | D2 |
| 3 | MFR-25FBF52-5K1 5.1 kOhm 1% Yageo | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
Usb c power design files
The KiCad project lives in the devkyber/PCB repository on GitHub; these links point at the commit this page was built from.
Usb c power: common questions
How big is the Usb c power PCB?
The Usb c power measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb c power?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb c power design files?
From the devkyber/PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb c power design in my own project?
The repository has no license, so all rights stay with devkyber. Use it as a reference, and ask the author before reusing the design.
More boards in PCB
- schematic only · 120 partsNXP
Tms
devkyber
120 parts2LNo license0 RP2040/RP2350
Rover power distribution board
devkyber
77.5 × 100 mm73 parts2LNo license0I2c sensor
devkyber
45 × 35 mm13 parts2LNo license0Rs485-interface
devkyber
50 × 35 mm9 parts2LNo license0GPIO Indicator - educational unbuilt DRAFT
devkyber
45 × 35 mm9 parts2LNo license0