Rs485-interface

devkyber·PCB·examples/rs485-interface/rs485-interface.kicad_pcb

Rs485-interface PCB layout, top view — open source board by devkyber

About the Rs485-interface PCB

Rs485-interface is an open source PCB design by devkyber, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 9 components from 8 distinct parts.

Other key parts include the THVD1450DR. By type, the board carries 3 resistors, 2 connectors, 2 capacitors, 1 IC and 1 jumper.

From the project

AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.

Unbuilt educational DRAFT. A native KiCad UART-to-half-duplex-RS-485 board with a TI THVD1450DR, independent driver/receiver controls and removable end termination. No isolation, industrial ESD/surge/EMC, physical-fit or link-speed qualification is claimed. Nothing here is approval to fabricate or energize.

Follow the bring-up guide for connector wiring, removable termination, default receive, local echo and the exact DE/nRE sequence around the last UART stop bit. Run these offline tools from the repository root; they access no serial port or GPIO:

Rs485-interface, from the project README
From the project README

Main components on the Rs485-interface

Rs485-interface bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
THVD1450DR
Texas Instruments
U1
1
HTSW-106-07-G-S
UART / 3V3
Samtec
J1
1
HTSW-103-07-G-S
BUS / A B GND
Samtec
J2
1
HTSW-102-07-G-S
Samtec
JP1
1
CC0805KRX7R9BB104
100 nF
Yageo
C1
1
CC0805KKX7R7BB105
1 uF
Yageo
C2
2
CRCW080510K0FKEA
10 kOhm
Vishay
R1, R2
1
CRCW1206120RFKEA
120 Ohm
Vishay
R3

Rs485-interface design files

The KiCad project lives in the devkyber/PCB repository on GitHub; these links point at the commit this page was built from.

Rs485-interface: common questions

How big is the Rs485-interface PCB?

The Rs485-interface measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rs485-interface?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rs485-interface design files?

From the devkyber/PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rs485-interface design in my own project?

The repository has no license, so all rights stay with devkyber. Use it as a reference, and ask the author before reusing the design.

More boards in PCB