I2c sensor

devkyber·PCB·examples/i2c-sensor/i2c-sensor.kicad_pcb

I2c sensor PCB layout, top view — open source board by devkyber

About the I2c sensor PCB

I2c sensor is an open source PCB design by devkyber, published on GitHub. It is a 2-layer board measuring 45 × 35 mm, with 13 components from 9 distinct parts.

Other key parts include the MCP9808T-E/MS. By type, the board carries 6 resistors, 3 jumpers, 2 connectors, 1 IC and 1 capacitor.

It belongs with the sensors designs in this gallery.

From the project

AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.

An editable 3.3 V MCP9808 MSOP breakout: eight selectable I2C addresses, a local ceramic bypass, fixed bus pullups and a separate open-drain ALERT header. Unbuilt DRAFT; no owner or fabrication approval.

Start with the register bring-up guide: decode MSB-first signed temperature words, verify identity/address, and produce a checked ALERT write recipe. Run the CLI from the repository root; it works offline with no hardware dependency:

Main components on the I2c sensor

I2c sensor bill of materials (BOM)

13 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP9808T-E/MS
U1
1
61300411121
POWER / I2C
J1
1
61300211121
ALERT / GND
J2
1
61300211121
A0 SHUNT
JP1
1
61300211121
A1 SHUNT
JP2
1
61300211121
A2 SHUNT
JP3
1
C0805C104K5RACTU
100n
C1
2
RC0805FR-074K7L
4.7k
R1, R2
4
RC0805FR-0710KL
10k
R3, R4, R5, R6

I2c sensor design files

The KiCad project lives in the devkyber/PCB repository on GitHub; these links point at the commit this page was built from.

I2c sensor: common questions

How big is the I2c sensor PCB?

The I2c sensor measures 45 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the I2c sensor?

13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the I2c sensor design files?

From the devkyber/PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the I2c sensor design in my own project?

The repository has no license, so all rights stay with devkyber. Use it as a reference, and ask the author before reusing the design.

More boards in PCB

Similar boards