HardLabs

Kicad hiltop 63hp backplane

devtank-ltd·kicad_hiltop_63hp_backplane·kicad_hiltop_63hp_backplane/hiltop_backplane_brd.kicad_pcb

Kicad hiltop 63hp backplane PCB layout, top view — open source Raspberry Pi board by devtank-ltd

About the Kicad hiltop 63hp backplane PCB

Kicad hiltop 63hp backplane is an open source Raspberry Pi PCB design by devtank-ltd, published on GitHub under the CERN-OHL-W-2.0 license. It is a 6-layer board measuring 200 × 129 mm, with 161 components from 43 distinct parts.

Its main chip is the SO-DIMM, from the Raspberry Pi family. Other key parts include the 93LCxxC, FT2232H, LTC4311 and USB2517. By type, the board carries 54 resistors, 53 capacitors, 19 fuses, 16 diodes, 8 connectors and 5 ICs.

From the project

This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.

This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.

You may redistribute and modify this documentation under the terms of the CERN-OHL-W v2 (https://cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions

Main components on the Kicad hiltop 63hp backplane

93LCxxCFT2232HLTC4311USB2517

Kicad hiltop 63hp backplane bill of materials (BOM)

161 components, 43 distinct parts.

QtyPartRefs
1
93LCxxC
U1
1
FT2232H
U2
2
LTC4311
U3, U4
1
USB2517
U5
1
ABM10AIG-12.000MHZ-4Z-T3
Y1
1
24Mhz Xtal
Y2
3
CONN_DIN_HDR_96POS
J4, J5, J6
1
HILTOP_PCIE-64_CONN
J7
1
PSU1
J8
1
PSU2
J9
1
PSU3
J10
1
SO-DIMM
J11
6
1206L075
F1, F4, F6, F9, F11, F14
10
1206L050
F2, F3, F7, F8, F12, F13, F16, F17 +2
3
2920L100PR
F5, F10, F15
2
LED RED
D3, D4
7
LED GRN
D14, D16, D18, D20, D22, D24, D26
7
LED YEL
D15, D17, D19, D21, D23, D25, D27
4
Ferrite_Bead
L2, L3, L4, L5
17
100nF
C2, C4, C7, C9, C10, C12, C13, C14 +9
Show 23 more
QtyPartRefs
2
10pF
C3, C5
2
4.7uf
C6, C11
1
3.3uF
C8
6
10nF
C20, C21, C28, C29, C36, C37
4
10uF
C22, C23, C30, C31
8
1uF
C24, C25, C32, C33, C40, C41, C49, C54
11
100nF
C38, C43, C44, C45, C46, C47, C48, C50 +3
2
18pF
C39, C42
3
10K
R1, R2, R3
1
2.2K
R4
10
0R
R5, R6, R84, R85, R86, R87, R88, R89 +2
1
1K
R7
1
12K
R8
6
0
R9, R10, R11, R12, R14, R15
1
DNP
R13
16
330
R16, R17, R68, R69, R70, R71, R72, R73 +8
3
0R
R45, R46, R47
1
0R
R48
1
100K
R49
5
10K
R50, R53, R54, R57, R58
1
1M
R51
1
12K
R52
3
DNP
R55, R56, R59

Kicad hiltop 63hp backplane design files

The KiCad project lives in the devtank-ltd/kicad_hiltop_63hp_backplane repository on GitHub; these links point at the commit this page was built from.

Kicad hiltop 63hp backplane: common questions

What microcontroller does the Kicad hiltop 63hp backplane use?

The Kicad hiltop 63hp backplane is built around the SO-DIMM, from the Raspberry Pi family.

How big is the Kicad hiltop 63hp backplane PCB?

The Kicad hiltop 63hp backplane measures 200 × 129 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Kicad hiltop 63hp backplane?

161 components, from 43 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad hiltop 63hp backplane design files?

From the devtank-ltd/kicad_hiltop_63hp_backplane repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Kicad hiltop 63hp backplane design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which devtank-ltd chose for the repository.

Can I test firmware for the Kicad hiltop 63hp backplane without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards