Kicad hiltop sensi board
devtank-ltd·kicad_hiltop_sensi_board·kicad_hiltop_sensi_board/Sensi_Board.kicad_pcb
About the Kicad hiltop sensi board
Kicad hiltop sensi board is an open source STM32 PCB design by devtank-ltd, published on GitHub. It is a 4-layer board measuring 159.6 × 100 mm, with 354 components from 76 distinct parts.
Its main chip is the STM32F072RBTx, from the STM32 family. Other key parts include the INA250A4, LD1117S33TR_SOT223, AT25DN512CSSHF-B, AD8646 and LM75B. By type, the board carries 172 resistors, 102 capacitors, 27 ICs, 16 diodes, 11 connectors and 6 inductors.
From the project
KiCAD files for Seni card for HILTOP
Main components on the Kicad hiltop sensi board
Kicad hiltop sensi board bill of materials (BOM)
354 components, 76 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA250A4 | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | AT25DN512CSSHF-B | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 2 | AD8646 | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 1 | LM75B | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | DNF | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 4 | MAX31865 | TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm | U8, U9, U10, U11 |
| 8 | MAX4194 | SOIC-8_3.9x4.9mm_P1.27mm | U12, U16, U19, U20, U21, U23, U24, U25 |
| 1 | CP2102N-A01-GQFN24 | CP2102_QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias_0.3mm_drill | U13 |
| 4 | BTS4140N | SOT-223 | U14, U15, U17, U18 |
| 1 | STM32F072RBTx | LQFP-64_10x10mm_P0.5mm | U22 |
| 1 | M74VHC1GT14DFT2G | SOT-353_SC-70-5 | U26 |
| 1 | USB2502 | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U27 |
| 5 | ZXMN6A07F | SOT-23 | Q2, Q7, Q8, Q10, Q11 |
| 1 | 50ppm 24.000MHZ | Crystal_SMD_TXC_7A-2Pin_5x3.2mm | Y1 |
| 1 | 8MHZ | Crystal_SMD_Abracon_ABM3C-4Pin_5.0x3.2mm | Y2 |
| 1 | ABS25-32.768KHZ-6-T | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y3 |
| 5 | Conn_02x06_Top_Bottom | Molex2x06 | J1, J2, J4, J5, J6 |
| 1 | Conn_03x32_DIN41612 | Socket_DIN41612-CaseC1-full-Male-96Pin-3rows_correct | J3 |
| 2 | Conn_02x07_Top_Bottom | 87831-1420_Molex_Milligrid | J7, J8 |
Show 56 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | J10 |
| 1 | Conn_02x10_Counter_Clockwise | Molex_Milligrid_2x10 | J11 |
| 1 | Polyfuse | R_1206_3216Metric | F1 |
| 1 | Jumper_NC_Dual | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 4 | Jumper_NC_Small | PinHeader_1x02_P1.27mm_Vertical | JP2, JP3, JP4, JP5 |
| 1 | HRS1KH-S | Relay_SPDT_HRS1KH-S | K1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 4 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2, SW3, SW4, SW5 |
| 4 | D_Schottky | D_SOD-123 | D1, D6, D7, D8 |
| 4 | GRN | LED_0603_1608Metric | D2, D3, D5, D13 |
| 1 | BAT54T1G | D_SOD-123 | D4 |
| 6 | BAV99 | SOT-23 | D14, D16, D18, D20, D22, D24 |
| 1 | MBR230LSFT1G | D_SOD-123 | D32 |
| 1 | 500mA/0.10DCR | L_0805_2012Metric | L1 |
| 5 | 2A/0.05DCR | L_0805_2012Metric | L3, L4, L6, L7, L11 |
| 20 | 100nF | C_0603_1608Metric | C1, C3, C7, C8, C20, C21, C22, C25 +12 |
| 45 | 100nF | C_0402_1005Metric | C2, C4, C5, C6, C9, C12, C14, C15 +37 |
| 2 | 10uF | C_0805_2012Metric | C10, C11 |
| 1 | 100uF | CP_Elec_6.3x7.7 | C13 |
| 8 | 1uF | C_0603_1608Metric | C31, C33, C34, C36, C38, C41, C42, C44 |
| 8 | 1nF | C_0603_1608Metric | C47, C49, C50, C54, C59, C65, C69, C71 |
| 6 | 4.7uF | C_0402_1005Metric | C55, C100, C102, C103, C104, C105 |
| 4 | DNF | C_0805_2012Metric | C57, C58, C63, C64 |
| 2 | 18pF | C_0603_1608Metric | C75, C76 |
| 2 | 4.3pF | C_0603_1608Metric | C77, C78 |
| 2 | 33pF | C_0603_1608Metric | C88, C89 |
| 1 | 1uF | C_0402_1005Metric | C91 |
| 1 | DNF | C_0402_1005Metric | C106 |
| 5 | 470R | R_0603_1608Metric | R1, R2, R5, R6, R50 |
| 26 | 10K | R_0603_1608Metric | R3, R4, R7, R12, R14, R18, R21, R24 +18 |
| 2 | DNF | R_1206_3216Metric | R8, R9 |
| 2 | 0R | R_1206_3216Metric | R10, R11 |
| 8 | 68R | R_0603_1608Metric | R13, R49, R53, R55, R63, R64, R65, R67 |
| 4 | 4K7 | R_0603_1608Metric | R15, R16, R47, R51 |
| 27 | DNF | R_0603_1608Metric | R17, R31, R33, R36, R38, R59, R62, R73 +19 |
| 4 | 16K | R_0603_1608Metric | R19, R22, R25, R27 |
| 1 | 47K | R_0603_1608Metric | R20 |
| 4 | 100R | R_0603_1608Metric | R23, R28, R29, R35 |
| 15 | 0R | R_0603_1608Metric | R30, R32, R34, R60, R61, R66, R76, R79 +7 |
| 14 | 100K | R_0603_1608Metric | R39, R40, R45, R46, R90, R93, R94, R95 +6 |
| 5 | DNF | R_0805_2012Metric | R41, R85, R86, R97, R98 |
| 18 | 1K | R_0603_1608Metric | R42, R43, R88, R89, R100, R101, R119, R122 +10 |
| 5 | 0R | R_0805_2012Metric | R44, R91, R92, R103, R104 |
| 1 | 2K2 | R_0603_1608Metric | R48 |
| 4 | 30R | R_0603_1608Metric | R54, R57, R69, R70 |
| 4 | 12.4K | R_0603_1608Metric | R56, R58, R71, R72 |
| 4 | 1.58K | R_0603_1608Metric | R68, R131, R157, R158 |
| 1 | 24K | R_0603_1608Metric | R78 |
| 5 | 330R | R_0603_1608Metric | R81, R82, R124, R141, R142 |
| 1 | 1M | R_0603_1608Metric | R87 |
| 1 | 20K | R_0603_1608Metric | R102 |
| 1 | 12.0K | R_0603_1608Metric | R109 |
| 8 | 10M | R_0603_1608Metric | R117, R118, R134, R135, R136, R145, R146, R150 |
| 1 | DNF | R_0402_1005Metric | R164 |
| 1 | 1k5 | R_0603_1608Metric | R171 |
Kicad hiltop sensi board design files
The KiCad project lives in the devtank-ltd/kicad_hiltop_sensi_board repository on GitHub; these links point at the commit this page was built from.
Kicad hiltop sensi board: common questions
What microcontroller does the Kicad hiltop sensi board use?
The Kicad hiltop sensi board is built around the STM32F072RBTx, from the STM32 family.
How big is the Kicad hiltop sensi board?
The Kicad hiltop sensi board measures 159.6 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kicad hiltop sensi board?
354 components, from 76 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad hiltop sensi board design files?
From the devtank-ltd/kicad_hiltop_sensi_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Kicad hiltop sensi board design in my own project?
The repository has no license, so all rights stay with devtank-ltd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad hiltop sensi board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k