Ext board

dglcinc·pivac·hardware/ext-board/ext-board.kicad_pcb

Ext board layout, top view — open source board by dglcinc

About the Ext board

Ext board is an open source PCB design by dglcinc, published on GitHub under the MIT license. It is a 2-layer board measuring 38.5 × 85 mm, with 19 components from 14 distinct parts.

Other key parts include the DS2482-100 and TMR 12-4811WI. By type, the board carries 4 connectors, 4 diodes, 3 capacitors, 2 ICs and 1 fuse.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Python library to vacuum data from Raspberry-Pi-based monitoring and control solutions (like HVAC)

1-WireTherm: 1-Wire-based Dallas temperature sensors (thermometers) GPIO: Generic reads of RPi GPIO pins, pulled high or low using internal pullup resistors RedLink: Screen scraping of Honeywell's website for RedLink thermostats, mytotalconnectcomfort.com (requires an account and installed RedLink equipment) TED5000: Parsing of the live XML feed from the TED5000 home energy monitoring solution ArduinoSensor: Pressure sensor data from an Arduino over HTTP (e.g. Fusch 100PSI, Fusch 200PSI) — a single implementation used by multiple config sections via the module: key Emporia: Per-circuit power…

Ext board, from the project README
From the project README

Main components on the Ext board

DS2482-100TMR 12-4811WI

Ext board bill of materials (BOM)

19 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DS2482-100
U1
1
TMR 12-4811WI
U3
1
GH BM07B link to INT
J1
1
VCC DATA GND
J2
1
PTSM 0,5/2-HH-2,5-THR 24 VAC
J3
1
5V OUT to Pi USB-C
J4
1
PTC 1.1A 60V
F1
3
PTSM 0,5/3-HH-2,5-THR
H1, H2, H3
1
proto
PF1
1
tie slots
TS1
4
1N4007
D1, D2, D3, D4
1
100N
100n
C1
1
470u 63V
C3
1
1u
C4

Ext board design files

The KiCad project lives in the dglcinc/pivac repository on GitHub; these links point at the commit this page was built from.

Ext board: common questions

How big is the Ext board?

The Ext board measures 38.5 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ext board?

19 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ext board design files?

From the dglcinc/pivac repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ext board design in my own project?

Yes, under the terms of its MIT license, which dglcinc chose for the repository.

More boards in pivac

Similar boards