Extc board
dglcinc·pivac·hardware/extc-board/extc-board.kicad_pcb
About the Extc board
Extc board is an open source PCB design by dglcinc, published on GitHub under the MIT license. It is a 2-layer board measuring 38.5 × 85 mm, with 17 components from 13 distinct parts.
Other key parts include the DS2482-100 and TMR 12-4811WI. By type, the board carries 4 connectors, 4 diodes, 3 capacitors, 2 ICs and 1 fuse.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Python library to vacuum data from Raspberry-Pi-based monitoring and control solutions (like HVAC)
1-WireTherm: 1-Wire-based Dallas temperature sensors (thermometers) GPIO: Generic reads of RPi GPIO pins, pulled high or low using internal pullup resistors RedLink: Screen scraping of Honeywell's website for RedLink thermostats, mytotalconnectcomfort.com (requires an account and installed RedLink equipment) TED5000: Parsing of the live XML feed from the TED5000 home energy monitoring solution ArduinoSensor: Pressure sensor data from an Arduino over HTTP (e.g. Fusch 100PSI, Fusch 200PSI) — a single implementation used by multiple config sections via the module: key Emporia: Per-circuit power…
Main components on the Extc board
Extc board bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS2482-100 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TMR 12-4811WI | TMR12WI_SIP-8 | U3 |
| 1 | GH BM07B link to INT | JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical | J1 |
| 1 | VCC DATA GND | Pads_1x3 | J2 |
| 1 | PTSM 0,5/2-HH-2,5-SMD 24 VAC | PTSM_0.5_2-HH-2.5-SMD | J3 |
| 1 | PTSM 0,5/2-HV-2,5-SMD 5V OUT | PTSM_0.5_2-HV-2.5-SMD | J4 |
| 1 | PTC 1.1A 60V | PTC_Radial_P5.08_Standing | F1 |
| 2 | PTSM 0,5/3-HH-2,5-SMD | PTSM_0.5_3-HH-2.5-SMD | H1, H2 |
| 1 | proto | Proto_8x3 | PF1 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | 100N 100n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 470u 63V | CP_Radial_D12.5mm_P5.00mm | C3 |
| 1 | 1u | C_Rect_L7.0mm_W2.5mm_P5.00mm | C4 |
Extc board design files
The KiCad project lives in the dglcinc/pivac repository on GitHub; these links point at the commit this page was built from.
Extc board: common questions
How big is the Extc board?
The Extc board measures 38.5 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Extc board?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Extc board design files?
From the dglcinc/pivac repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Extc board design in my own project?
Yes, under the terms of its MIT license, which dglcinc chose for the repository.
More boards in pivac
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k