Int board

dglcinc·pivac·hardware/int-board/int-board.kicad_pcb

Int board layout, top view — open source board by dglcinc

About the Int board

Int board is an open source PCB design by dglcinc, published on GitHub under the MIT license. It is a 2-layer board measuring 59 × 85 mm, with 25 components from 9 distinct parts.

Other key parts include the LTV-847. By type, the board carries 12 resistors, 7 connectors, 3 ICs and 3 test points.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Python library to vacuum data from Raspberry-Pi-based monitoring and control solutions (like HVAC)

1-WireTherm: 1-Wire-based Dallas temperature sensors (thermometers) GPIO: Generic reads of RPi GPIO pins, pulled high or low using internal pullup resistors RedLink: Screen scraping of Honeywell's website for RedLink thermostats, mytotalconnectcomfort.com (requires an account and installed RedLink equipment) TED5000: Parsing of the live XML feed from the TED5000 home energy monitoring solution ArduinoSensor: Pressure sensor data from an Arduino over HTTP (e.g. Fusch 100PSI, Fusch 200PSI) — a single implementation used by multiple config sections via the module: key Emporia: Per-circuit power…

Int board, from the project README
From the project README

Main components on the Int board

Int board bill of materials (BOM)

25 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
LTV-847
U1, U2, U3
4
PTSM 0,5/4-HH-2,5-THR
J1, J2, J3, J4
1
Pi 40-pin socket
J5
1
GH SM07B link to EXT
J6
1
GPIO breakout
J9
1
VS
TP1
1
COM
TP2
1
GND
TP3
12
12k 1/4W
R1, R2, R3, R4, R5, R6, R7, R8 +4

Int board design files

The KiCad project lives in the dglcinc/pivac repository on GitHub; these links point at the commit this page was built from.

Int board: common questions

How big is the Int board?

The Int board measures 59 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Int board?

25 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Int board design files?

From the dglcinc/pivac repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Int board design in my own project?

Yes, under the terms of its MIT license, which dglcinc chose for the repository.

More boards in pivac

Similar boards