3 open source boards using the DS2482-100
Real designs built with the DS2482-100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ext board
dglcinc
38.5 × 85 mm19 parts2LMIT2Extc board
dglcinc
38.5 × 85 mm17 parts2LMIT2I2C to 1-Wire Click
michpro
25.4 × 42.9 mm12 parts2LCERN-OHL-P-2.05
The DS2482-100 in open source designs
The gallery holds 3 open source boards using the DS2482-100 from 2 GitHub repositories; a typical one measures about 38.5 × 85 mm and carries around 17 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is I2C to 1-Wire Click by michpro.
What boards using the DS2482-100 are built for
DS2482-100: common questions
Where can I find a DS2482-100 reference design?
Each of the 3 boards on this page is a real design using the DS2482-100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the DS2482-100?
The median is 38.5 × 85 mm, and 100% are two-layer designs.
What is the most popular open source board using the DS2482-100?
By GitHub stars, I2C to 1-Wire Click by michpro, with 5 stars.
Can I simulate one of these boards using the DS2482-100 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.