Handheld Gaming device
About the Handheld Gaming device PCB
Handheld Gaming device is an open source PCB design by DhairyaAPImaster, published on GitHub. It is a 2-layer board measuring 180.5 × 81.8 mm, with 60 components from 39 distinct parts.
Other key parts include the MT3608, ADS1115IDGS and MAX98357A. By type, the board carries 24 resistors, 11 connectors, 11 switches, 6 capacitors, 3 ICs and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
This is a custom handheld retro gaming device i am making with a custom PCB powered by a pi zero 2w
BTW NOTE: the case shall be printed by someone who was willing to print it from the slack channel - #printing-legion.
very VERY IMPORTANT NOTE TO MACONDO REVIWER ---> SO IN THE BOM U MIGHT SEE THAT THE QTY OF SOME OF THE COMPONENTS FROM ROBU.IN IS MORE THAN REQUIRED THIS IS BECAUSE ROBU.IN HAS A MINIMUM ORDER QTY OF 10 INDIAN RUPEES PER COMPONENT SO HENCE I HAD TO LIKE INCREASE THE QTY OF SOME OF THE PASIVE COMPOENNTS TO LIKE FOLLOW THIS. BTW ITS STILL LIKE WAY WAY CHEAPER THAN JLCPCB'S PCBA THAT WOULD HAVE BROUGHT THE TOTAL COST TO 199.56 USD EXCLUDING TAX (I CHECKED)
Main components on the Handheld Gaming device
Handheld Gaming device bill of materials (BOM)
60 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT3608 | SOT-23-6 | U2 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | CONN_02X20_ODD_EVEN Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | TP4056_MODULE TP4056_Module | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Joystick_Left | PinSocket_1x05_P2.54mm_Horizontal | J3 |
| 1 | Joystick_Right | PinSocket_1x05_P2.54mm_Horizontal | J4 |
| 1 | DISPLAY_5V Display_5V | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | AUDIOJACK3_3.5MM AudioJack3_3.5mm | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J7 |
| 2 | FCC Connector Left Board | PinHeader_1x12_P1.00mm_Vertical | J10, J13 |
| 2 | FCC Connector Right Board | PinHeader_1x12_P1.00mm_Vertical | J11, J12 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | Battery_3.7V1 |
| 1 | Joystick Module Left Board | Joystick Module 40x27mm | JM1 |
| 1 | Joystick Module right board | Joystick Module 40x27mm | JM2 |
| 1 | SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | Button_A | SW_PUSH_6mm_H5mm | SW2 |
| 1 | Button_B | SW_PUSH_6mm_H5mm | SW3 |
| 1 | Button_X | SW_PUSH_6mm_H5mm | SW4 |
| 1 | Button_Y | SW_PUSH_6mm_H5mm | SW5 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D-pad UP | SW_PUSH_6mm_H5mm | SW6 |
| 1 | D-pad DOWN | SW_PUSH_6mm_H5mm | SW7 |
| 1 | D-pad LEFT | SW_PUSH_6mm_H5mm | SW8 |
| 1 | D-pad RIGHT | SW_PUSH_6mm_H5mm | SW9 |
| 1 | Start | SW_PUSH_6mm_H5mm | SW12 |
| 1 | Select | SW_PUSH_6mm_H5mm | SW13 |
| 1 | 1N5819 | D_SOD-123 | D3 |
| 1 | 22UH 22uH | L_Bourns_SRR1260 | L1 |
| 1 | 22µF | C_0805_2012Metric | C3 |
| 1 | 22UF 22uF | C_0805_2012Metric | C4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C5 |
| 1 | 100NF 100nF | C_0402_1005Metric | C6 |
| 2 | 100µF | CP_Radial_D6.3mm_P2.50mm | C7, C8 |
| 1 | 100K 100k | R_0402_1005Metric | R4 |
| 1 | 33K 33k | R_0402_1005Metric | R5 |
| 14 | 10K 10k | R_0402_1005Metric | R6, R7, R8, R9, R10, R11, R12, R13 +6 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R18, R19 |
| 2 | 100 | R_0402_1005Metric | R20, R21 |
| 4 | 20K 20k | R_0402_1005Metric | R24, R25, R26, R27 |
Handheld Gaming device design files
The KiCad project lives in the DhairyaAPImaster/TGH-The-great-DIY-Handheld repository on GitHub; these links point at the commit this page was built from.
Handheld Gaming device: common questions
How big is the Handheld Gaming device PCB?
The Handheld Gaming device measures 180.5 × 81.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Handheld Gaming device?
60 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Handheld Gaming device design files?
From the DhairyaAPImaster/TGH-The-great-DIY-Handheld repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Handheld Gaming device design in my own project?
The repository has no license, so all rights stay with DhairyaAPImaster. Use it as a reference, and ask the author before reusing the design.
More boards in TGH-The-great-DIY-Handheld
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
GB-BRK-SLOT-A
Gekkio
81 × 80 mm20 parts2LCC-BY-4.0376
GB-BRK-SLOT-B
81 × 80 mm20 parts2LCC-BY-4.0376
GB-BRK-CPU-G2
80 × 80 mm12 parts2LCC-BY-4.0376