Motor driver
Dhruv2212-star·Motor-driver·PCB/Motor driver.kicad_pcb
About the Motor driver PCB
Motor driver is an open source PCB design by Dhruv2212-star, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 14 components from 11 distinct parts.
Other key parts include the TB6612FNG. By type, the board carries 5 capacitors, 4 connectors, 1 IC, 1 transistor, 1 fuse and 1 diode.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
it is a very simple motor driver that will recive the data from another micro-controller
The schematic is divided into 2 parts for easier designing- 1. Power distribution system 2. Logic system
The Power System is responsible for receiving power from the battery, protecting the circuit from electrical faults, filtering supply noise, and delivering a clean, protected power rail to the motor driver IC. Every component in this block contributes to either protection, power conditioning, or power distribution. | Ref | Component | Selected Part | Why this part was used and what role it plays | | ------ | ----------------------- | ------------------------------- |…
Main components on the Motor driver
Motor driver bill of materials (BOM)
14 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U1 |
| 1 | AO3407A | SOT-23 | Q1 |
| 3 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J3, J4 |
| 1 | CONN_01X09_PIN Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | MF-R250 | Fuse_Bourns_MF-RG300 | F1 |
| 1 | SMBJ15A | D_SMB | D1 |
| 1 | 470 µF, 25 V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100 nF, 50 V | C_0805_2012Metric | C2 |
| 2 | 100 nF | C_0805_2012Metric | C3, C4 |
| 1 | 10 µF, 25 V | CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 100 kΩ, 1% | R_0805_2012Metric | R1 |
Motor driver design files
The KiCad project lives in the Dhruv2212-star/Motor-driver repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Motor driver.kicad_pcb
- SchematicPCB/Motor driver.kicad_sch
- BOMBOM.csv
Motor driver: common questions
How big is the Motor driver PCB?
The Motor driver measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor driver?
14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motor driver design files?
From the Dhruv2212-star/Motor-driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Motor driver design in my own project?
The repository has no license, so all rights stay with Dhruv2212-star. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k