HardLabs

PowerMeterLC

dianventer·OpenAmpMeter·Hardware/PowerMeterLC/PowerMeterLC.kicad_pcb

PowerMeterLC PCB layout, top view — open source ESP32 board by dianventer
Simulate this board

About the PowerMeterLC PCB

PowerMeterLC is an open source ESP32 PCB design by dianventer, published on GitHub. It is a 4-layer board measuring 30 × 50 mm, with 30 components from 11 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 12 capacitors, 10 resistors, 3 switches, 2 ICs, 2 connectors and 1 diode.

From the project

A Low Cost ESP32 C3 based current meter. Hardware is availble in two versions. Firmware currently in progress. Webapp and server code to come soon

Main components on the PowerMeterLC

AMS1117-3.3ESP32-C3-WROOM-02

PowerMeterLC bill of materials (BOM)

30 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U2
1
ESP32-C3-WROOM-02
U4
1
C2927038
USB_C_Receptacle
J2
1
AUDIOJACK4
AudioJack4
J3
3
SW_Push
SW1, SW2, SW3
1
C2827302
LED_GBAR
D2
8
C2857981
100nF 25V
C5, C6, C10, C11, C13, C16, C17, C18
4
10UF
10uF
C12, C14, C15, C19
5
5K1
R2, R3, R4, R5, R6
3
100
R7, R8, R9
2
1K
R10, R11

PowerMeterLC design files

The KiCad project lives in the dianventer/OpenAmpMeter repository on GitHub; these links point at the commit this page was built from.

PowerMeterLC: common questions

What microcontroller does the PowerMeterLC use?

The PowerMeterLC is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the PowerMeterLC PCB?

The PowerMeterLC measures 30 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PowerMeterLC?

30 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PowerMeterLC design files?

From the dianventer/OpenAmpMeter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PowerMeterLC design in my own project?

The repository has no license, so all rights stay with dianventer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PowerMeterLC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in OpenAmpMeter

Similar boards