12v automatic ups
dilshan·12v-automatic-ups·design/ups-12v.kicad_pcb
About the 12v automatic ups PCB
12v automatic ups is an open source PIC PCB design by dilshan, published on GitHub under the MIT license. It is a 2-layer board measuring 131.8 × 99.9 mm, with 72 components from 53 distinct parts.
Its main chip is the PIC16F688, from the PIC family. Other key parts include the LM350T, PC817, LM2576T-12 and LM7805. By type, the board carries 17 resistors, 15 capacitors, 14 diodes, 8 connectors, 5 ICs and 3 transistors.
It belongs with the power & battery designs in this gallery.
From the project
12V Automatic UPS system
This 12V uninterruptible power supply initially designs to drive my fiber optic modem/router. The key reason to build this power supply is to get continuous internet and phone connection during power failures. Core components of this power supply are a constant voltage charger, 12V DC power supply, AC line monitoring unit, and 12V high capacity sealed lead-acid battery. The entire system designs using locally available components.
Main components on the 12v automatic ups
12v automatic ups bill of materials (BOM)
72 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM350T LM350 | TO-220-3_Vertical | U1 |
| 1 | PIC16F688 | DIP-14_W7.62mm_LongPads | U2 |
| 1 | PC817 | DIP-4_W7.62mm | U3 |
| 1 | LM2576T-12 | TO-220-5_Vertical | U4 |
| 1 | LM7805 | TO-220-3_Vertical | U5 |
| 1 | BC547 | TO-92_HandSolder | Q1 |
| 1 | BC548 | TO-92_HandSolder | Q2 |
| 1 | BD135 | TO-126-3_Vertical | Q3 |
| 1 | 15V-AC-IN | Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical | J1 |
| 1 | AC-IN | Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical | J2 |
| 1 | ICSP | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | BATTERY | Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical | J4 |
| 1 | OUTPUT | Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical | J5 |
| 1 | DEBUG | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | AC-OUT | Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical | J7 |
| 1 | 12V-AC-IN | Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical | J8 |
| 1 | 3A/230V | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | NEON | Fuse_Bourns_MF-RG300 | NE1 |
| 1 | G2RL-2-DC12 | Relay_DPDT_Omron_G2RL | RL1 |
| 1 | 10K | Potentiometer_Runtron_RM-065_Vertical | RV1 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5K | Potentiometer_Runtron_RM-065_Vertical | RV2 |
| 1 | 2K | Potentiometer_Runtron_RM-065_Vertical | RV3 |
| 3 | 7D471K | RV_Disc_D9mm_W4mm_P5mm | RV4, RV5, RV6 |
| 3 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4, D12 |
| 2 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D5 |
| 1 | 1N5399 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 5mm RED | PinHeader_1x02_P2.54mm_Vertical | D6 |
| 2 | 6A10 | D_P600_R-6_P20.00mm_Horizontal | D7, D8 |
| 1 | 5mm GREEN | PinHeader_1x02_P2.54mm_Vertical | D9 |
| 3 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D10, D13, D14 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D11 |
| 1 | 100uH | L_Toroid_Vertical_L13.0mm_W6.5mm_P5.60mm | L1 |
| 1 | 10MFD | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | 4700MFD | CP_Radial_D18.0mm_P7.50mm | C2, C13 |
| 2 | 2200MFD | CP_Radial_D16.0mm_P7.50mm | C3, C14 |
| 5 | 0.1MFD | C_Disc_D10.5mm_W5.0mm_P7.50mm | C4, C5, C8, C9, C10 |
| 1 | 100MFD | CP_Radial_D6.3mm_P2.50mm | C6 |
| 2 | 1000MFD | CP_Radial_D12.5mm_P5.00mm | C7, C15 |
| 1 | 33MFD | CP_Radial_D5.0mm_P2.50mm | C11 |
| 1 | 0.22MFD | C_Disc_D11.0mm_W5.0mm_P10.00mm | C12 |
| 2 | 0.47R | R_Axial_Power_L25.0mm_W6.4mm_P27.94mm | R2, R4 |
| 1 | 22.0K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 0R | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R5 |
| 1 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6 |
| 1 | 270.0R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 680.0R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R16 |
| 2 | 0R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R17 |
| 2 | 560R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R14 |
| 1 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 5.6K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
12v automatic ups design files
The KiCad project lives in the dilshan/12v-automatic-ups repository on GitHub; these links point at the commit this page was built from.
- Layoutdesign/ups-12v.kicad_pcb
- BOMBOM.md
12v automatic ups: common questions
What microcontroller does the 12v automatic ups use?
The 12v automatic ups is built around the PIC16F688, from the PIC family.
How big is the 12v automatic ups PCB?
The 12v automatic ups measures 131.8 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 12v automatic ups?
72 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12v automatic ups design files?
From the dilshan/12v-automatic-ups repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the 12v automatic ups design in my own project?
Yes, under the terms of its MIT license, which dilshan chose for the repository.
Can I test firmware for the 12v automatic ups without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379