Semiconductor parameter daq bench
Divyansh12-86·semiconductor-parameter-daq-bench·hardware/kicad/curve_tracer.kicad_pcb
About the Semiconductor parameter daq bench PCB
Semiconductor parameter daq bench is an open source AVR/Arduino PCB design by Divyansh12-86, published on GitHub. It is a 2-layer board measuring 162 × 100 mm, with 24 components from 21 distinct parts.
Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the MCP4725_Breakout, ADS1115_Breakout and MCP6002-xP. By type, the board carries 9 resistors, 5 ICs, 3 connectors, 2 diodes, 2 capacitors and 1 transistor.
It belongs with the test & measurement and dev boards & breakouts designs in this gallery.
From the project
An Arduino UNO R4-based automated I–V curve tracer for semiconductor characterization. Uses programmable gate and drain drive, an ADS1115 ADC, and switched 10 Ω/1 kΩ current-sensing ranges to measure MOSFET characteristics. Python tools process measurements, extract device parameters, plot curves, and generate LaTeX-based characterization reports.
Location: kicadproject/ KiCad Version: 10.0.6 (Fully compatible with KiCad 8.x / 9.x / 10.x) Verification Status: - ERC (Electrical Rules Check): 0 Errors, 0 Warnings (100% PASS) - DRC (Design Rules Check): 0 Errors, 0 Warnings (100% PASS) - Unconnected Items: 0 Unconnected Pads (100% ROUTED**)
1. Launch KiCad and choose File → Open Project... 2. Navigate to this folder and select:
Main components on the Semiconductor parameter daq bench
Semiconductor parameter daq bench bill of materials (BOM)
24 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_UNO_R3 | Arduino_UNO_R3 | U1 |
| 2 | MCP4725_Breakout | PinHeader_1x06_P2.54mm_Vertical | U2, U3 |
| 1 | ADS1115_Breakout | PinHeader_1x10_P2.54mm_Vertical | U4 |
| 1 | MCP6002-xP | DIP-8_W7.62mm | U5 |
| 1 | BC547 | TO-92_Inline_Wide | Q1 |
| 1 | Drive_Select | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | DUT_Socket | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Cal_Header | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Relay_SPDT | Relay_SPDT_Omron-G5Q-1 | K1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Green | LED_D5.0mm | D2 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
Semiconductor parameter daq bench design files
The KiCad project lives in the Divyansh12-86/semiconductor-parameter-daq-bench repository on GitHub; these links point at the commit this page was built from.
Semiconductor parameter daq bench: common questions
What microcontroller does the Semiconductor parameter daq bench use?
The Semiconductor parameter daq bench is built around the Arduino_UNO_R3, from the AVR/Arduino family.
How big is the Semiconductor parameter daq bench PCB?
The Semiconductor parameter daq bench measures 162 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Semiconductor parameter daq bench?
24 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Semiconductor parameter daq bench design files?
From the Divyansh12-86/semiconductor-parameter-daq-bench repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Semiconductor parameter daq bench design in my own project?
The repository has no license, so all rights stay with Divyansh12-86. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Semiconductor parameter daq bench without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k