Eurobusboard idc jst 8
About the Eurobusboard idc jst 8 PCB
Eurobusboard idc jst 8 is an open source PCB design by DIYSynthMNL, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 146 × 70 mm, with 33 components from 30 distinct parts.
By type, the board carries 22 connectors, 4 diodes, 3 test points, 2 capacitors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
A Eurorack Bus Board that has 8 outputs
A Eurorack bus board with 8 module slots, distributing ±12V + GND across multiple connector formats. The project has three PCB variants in the same KiCad project: 10-pin IDC + JST combined, 10-pin IDC only, and JST only.
The KiCad project contains four configurations. Pick one when fabricating the PCB:
All variants share the same power-input + reverse-protection + filter section. Only the per-slot connectors differ.
Eurobusboard idc jst 8 bill of materials (BOM)
33 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power In | TerminalBlock_MetzConnect_Type101_RT01603HBWC_1x03_P5.08mm_Horizontal | J1 |
| 1 | IDC1 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J2 |
| 1 | JST1 | Eurorack_power_jst_3P | J3 |
| 1 | IDC2 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J4 |
| 1 | JST2 | Eurorack_power_jst_3P | J5 |
| 1 | IDC3 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J6 |
| 1 | JST3 | Eurorack_power_jst_3P | J7 |
| 1 | IDC4 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J8 |
| 1 | JST4 | Eurorack_power_jst_3P | J9 |
| 1 | IDC5 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J10 |
| 1 | JST5 | Eurorack_power_jst_3P | J11 |
| 1 | IDC6 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J12 |
| 1 | JST6 | Eurorack_power_jst_3P | J13 |
| 1 | IDC7 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J14 |
| 1 | JST7 | Eurorack_power_jst_3P | J15 |
| 1 | IDC8 | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J16 |
| 1 | JST8 | Eurorack_power_jst_3P | J17 |
| 1 | Power thru | TerminalBlock_MetzConnect_Type101_RT01603HBWC_1x03_P5.08mm_Horizontal | J18 |
| 1 | Power In | Eurorack_power_jst_3P | J19 |
| 1 | Power thru | Eurorack_power_jst_3P | J20 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power Thru | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J21 |
| 1 | Power In | IDC-Header_2x05_P2.54mm_Vertical_BigPads | J22 |
| 1 | +12V | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1 |
| 1 | GND | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP2 |
| 1 | -12V | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP3 |
| 1 | +12V | LED_D5.0mm_BigPads | D1 |
| 1 | -12V | LED_D5.0mm_BigPads | D2 |
| 2 | 4007 | D_DO-41_SOD81_P7.62mm_Horizontal_BigPads | D3, D4 |
| 2 | 100uF | CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 2 | 10K | R_quarter_watt_L6.3mm_D2.5mm_P7.62mm | R1, R2 |
Eurobusboard idc jst 8 design files
The KiCad project lives in the DIYSynthMNL/EuroBusboard repository on GitHub; these links point at the commit this page was built from.
Eurobusboard idc jst 8: common questions
How big is the Eurobusboard idc jst 8 PCB?
The Eurobusboard idc jst 8 measures 146 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eurobusboard idc jst 8?
33 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eurobusboard idc jst 8 design files?
From the DIYSynthMNL/EuroBusboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Eurobusboard idc jst 8 design in my own project?
Yes, under the terms of its GPL-3.0 license, which DIYSynthMNL chose for the repository.
More boards in EuroBusboard
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687