Brushless Controller Test Board

DJAY101·Dynamiq_BLDC_Controller·PCB_FILES_Version1/Brushless_Controller_Test_Board.kicad_pcb

Brushless Controller Test Board layout, top view — open source ESP32 board by DJAY101

About the Brushless Controller Test Board

Brushless Controller Test Board is an open source ESP32 PCB design by DJAY101, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 98.8 × 80 mm, with 108 components from 60 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AS5047P-ATSM_C962063, TMC6200-TA-T, AMS1117-3.3 and TPS5430DDAR. By type, the board carries 31 capacitors, 31 resistors, 22 test points, 8 diodes, 6 transistors and 5 ICs.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

Bringing brushless motor control to the masses

FRC Falcon 500 Motors inspired this project, since there are no suitable motor options at a suitable price that enables hobbyists to utilise these amazing pieces of technology. (Odrive being 200USD+)

Version 1 of the PCB worked with the following code. However I ended up frying two of the boards during programming and tinkering with the board. I am currently working on a version 2 iteration of the PCB from the mistakes and lack of safety features in V1.

Brushless Controller Test Board, from the project README
From the project README

Main components on the Brushless Controller Test Board

ESP32-S3-WROOM-1AS5047P-ATSM_C962063TMC6200-TA-TAMS1117-3.3TPS5430DDAR

Brushless Controller Test Board bill of materials (BOM)

108 components, 60 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
AS5047P-ATSM_C962063
U2
1
TMC6200-TA-T
U3
1
AMS1117-3.3
U4
1
TPS5430DDAR
U5
6
N_FET_ISC0602NLS
Q1, Q2, Q3, Q4, Q5, Q6
1
USB_C_Receptacle_USB2.0_16P
J1
1
HC-PM254-8.5H-2X24PZ
H1
2
SW_MEC_5E
SW1, SW2
1
SPI_EN
TP1
1
CSN_ENCODER
TP2
1
CLK_ENCODER
TP3
1
MISO_ENCODER
TP4
1
MOSI_ENCODER
TP5
1
GND_ENCODER
TP6
1
B_ENCODER
TP7
1
A_ENCODER
TP8
1
I_ENCODER
TP9
1
5V_ENCODER
TP10
1
U_ENCODER
TP11
Show 40 more
QtyPartRefs
1
V_ENCODER
TP12
1
W/PWM_ENCODER
TP13
2
L_G
TP19, TP20
1
LOW_GATE
TP21
3
HIGH_GATE
TP22, TP23, TP24
1
D_U
TP25
1
D_V
TP26
1
D_W
TP27
2
PSM712-LF-T7
D1, D4
1
Fault_LED
D2
1
LIPO_ALERT
D3
1
STATUS_1_LED
D5
1
STATUS_2_LED
D6
1
LED
D8
1
SS34
D9
1
15uH
L1
3
100nF
C1, C2, C14
9
0.1uF
C3, C4, C5, C6, C7, C15, C17, C18 +1
1
100nF 16V
C8
2
100nF 50V
C9, C10
1
22nF 100V
C11
1
4.7uF
C12
1
2.2uF
C13
1
1uF
C16
1
10uF - TAJA106K016RNJ
C19
2
10uF
C20, C25
1
22uF Tant TAJB226K010RNJ
C21
1
0.01uF
C22
1
100uF
C23
1
220uF-C3342
C24
2
470UF
470uF -C3351
C27, C28
3
470nF 16V
C29, C30, C31
12
10K
R1, R4, R5, R6, R7, R8, R9, R11 +4
5
150
R2, R3, R13, R14, R18
2
5.1K
R10, R12
1
47R
47
R16
1
1K
R20
1
3.3K
R22
6
2.2
R23, R24, R25, R26, R27, R28
3
10mR
R29, R30, R31

Brushless Controller Test Board design files

The KiCad project lives in the DJAY101/Dynamiq_BLDC_Controller repository on GitHub; these links point at the commit this page was built from.

Brushless Controller Test Board: common questions

What microcontroller does the Brushless Controller Test Board use?

The Brushless Controller Test Board is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Brushless Controller Test Board?

The Brushless Controller Test Board measures 98.8 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Brushless Controller Test Board?

108 components, from 60 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Brushless Controller Test Board design files?

From the DJAY101/Dynamiq_BLDC_Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Brushless Controller Test Board design in my own project?

Yes, under the terms of its GPL-3.0 license, which DJAY101 chose for the repository.

Can I test firmware for the Brushless Controller Test Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Dynamiq_BLDC_Controller

Similar boards