HardLabs

Aegis hack the badge

dkuaegis·aegis-hack-the-badge·hardware/design/rev3/kicad/hacking_box_v2.kicad_pcb

Aegis hack the badge PCB layout, top view — open source ESP32 board by dkuaegis
Simulate this board

About the Aegis hack the badge PCB

Aegis hack the badge is an open source ESP32 PCB design by dkuaegis, published on GitHub. It is a 2-layer board measuring 84 × 100 mm, with 29 components from 10 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 9 capacitors, 5 LEDs, 2 ICs, 2 resistors, 1 connector and 1 buzzer.

It belongs with the wearables designs in this gallery.

From the project

Aegis 보안팀 해킹체험 프로젝트

This directory contains the routed production PCB, connected review schematic, project-local symbols and footprints, 3D assets, and electrical verification reports for the ESP32-S3 Hacking Badge Ver.3.

- Project root: editable KiCad project and local libraries only. - scripts/: deterministic generation and validation scripts. - reports/: current DRC, ERC, netlist, and validation reports. - exports/: current human-readable schematic and 3D PDF exports. - Historical PCB revisions, autorouter sessions, rescue files, and superseded renders live in ../../../../archive/design/rev3-development/ and…

Main components on the Aegis hack the badge

ESP32-S3-WROOM-1-N8R8AMS1117-3.3

Aegis hack the badge bill of materials (BOM)

29 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R8
U1
1
AMS1117-3.3
U2
1
TYPE-C-31-M-12
J1
1
SMD5020-ZK
BZ1
8
1k
R_CHAL0, R_CHAL1, R_CHAL2, R_LED1, R_LED2, R_LED3, R_LED4, R_LED5
5
RED_STATUS
LED1, LED2, LED3, LED4, LED5
1
USBLC6-2SC6
D1
6
10UF
10uF
C1, C3, C4, C5, C7, C9
3
100NF
100nF
C2, C6, C8
2
5.1K
5.1k
R1, R2

Aegis hack the badge design files

The KiCad project lives in the dkuaegis/aegis-hack-the-badge repository on GitHub; these links point at the commit this page was built from.

Aegis hack the badge: common questions

What microcontroller does the Aegis hack the badge use?

The Aegis hack the badge is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the Aegis hack the badge PCB?

The Aegis hack the badge measures 84 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aegis hack the badge?

29 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aegis hack the badge design files?

From the dkuaegis/aegis-hack-the-badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aegis hack the badge design in my own project?

The repository has no license, so all rights stay with dkuaegis. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aegis hack the badge without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards