70 open source boards using the ESP32-S3-WROOM-1-N8R8

Real designs built with the ESP32-S3-WROOM-1-N8R8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

70 boardsClear filters|Most starred

How designs wire the ESP32-S3-WROOM-1-N8R8

Read from the KiCad layouts of 54 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1-N8R8 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 43 of 54 designs, most often 1 µF (then 100 nF).
  • The EN pin has a pull-up to 3.3V on 41 of 54 designs, most often 10 kΩ (then 100 kΩ).
  • The 3V3 pin is tied to 3.3V on 47 of 54 designs (a signal on 7).
  • The IO37 pin is left unconnected on 42 of 51 designs (a signal on 9).
GND_1pin 1Connected to: GND 96%
3V3pin 2Connected to: 3.3V 87%
ENpin 3Connected to: A connector 20%
  • Capacitor to GND on 80% · 1 µF (26), 100 nF (15), 10 µF (5)
  • Pull-up to 3.3V on 76% · 10 kΩ (36), 100 kΩ (1), 4.7 kΩ (1)
IO46pin 16Connected to: Not connected 70% · a signal 30%
IO47pin 24Connected to: Not connected 63% · a signal 37%
IO45pin 26Connected to: Not connected 73% · a signal 27%
IO0pin 27Connected to: Signal 92%
  • Pull-up to 3.3V on 47% · 10 kΩ (21), 0 Ω (1)
IO35pin 28Connected to: Not connected 80% · a signal 20%
IO36pin 29Connected to: Not connected 80% · a signal 20%
IO37pin 30Connected to: Not connected 82% · a signal 18%
GNDpin 40Connected to: GND 96%
GND_41pin 41Connected to: GND 93%

29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp32 minimal by atopile, Doorman S3 by AzonInc, ESP32-S3-DevKit-LiPo Rev B by OLIMEX and ESP32 SIFIVE by probe-rs.

The ESP32-S3-WROOM-1-N8R8 in open source designs

The gallery holds 70 open source boards using the ESP32-S3-WROOM-1-N8R8 from 60 GitHub repositories; a typical one measures about 84.7 × 72.3 mm and carries around 57 components.

51% use four copper layers or more, and 54% carry an open source license.

The most starred is Esp32 minimal by atopile.

Microcontrollers on boards using the ESP32-S3-WROOM-1-N8R8

ESP32-S3-WROOM-1-N8R8: common questions

Where can I find a ESP32-S3-WROOM-1-N8R8 reference design?

Each of the 70 boards on this page is a real design using the ESP32-S3-WROOM-1-N8R8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-WROOM-1-N8R8 EN pin connected?

The EN pin has a capacitor to GND on 43 of 54 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 54 open source designs using the ESP32-S3-WROOM-1-N8R8.

How is the ESP32-S3-WROOM-1-N8R8 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 47 of 54 designs (a signal on 7). Counted from the KiCad layouts of 54 open source designs using the ESP32-S3-WROOM-1-N8R8.

How is the ESP32-S3-WROOM-1-N8R8 IO37 pin connected?

The IO37 pin is left unconnected on 42 of 51 designs (a signal on 9). Counted from the KiCad layouts of 54 open source designs using the ESP32-S3-WROOM-1-N8R8.

What parts are used alongside the ESP32-S3-WROOM-1-N8R8?

The USBLC6-2SC6, AP2112K-3.3TRG1, AMS1117-3.3, AP63203WU-7 and TP4056 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S3-WROOM-1-N8R8 use?

Most are built on ESP32 (67) and RP2040/RP2350 (3).

How big is a typical board using the ESP32-S3-WROOM-1-N8R8?

The median is 84.7 × 72.3 mm, and 49% are two-layer designs.

What is the most popular open source board using the ESP32-S3-WROOM-1-N8R8?

By GitHub stars, Esp32 minimal by atopile, with 4,032 stars.

Can I simulate one of these boards using the ESP32-S3-WROOM-1-N8R8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part