5v PSU
About the 5v PSU PCB
5v PSU is an open source PCB design by DomAtTheShack, published on GitHub. It is a 2-layer board measuring 132 × 104.5 mm, with 21 components from 19 distinct parts.
Other key parts include the WD65C02. By type, the board carries 7 capacitors, 3 diodes, 3 resistors, 2 connectors, 1 IC and 1 fuse.
It belongs with the dev boards & breakouts and retro computing designs in this gallery.
Main components on the 5v PSU
5v PSU bill of materials (BOM)
21 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WD65C02 LM2596T-5 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | IEC_60320_C14_Receptacle | IEC_THT | J1 |
| 1 | CONN_02X20_ODD_EVEN Barrel_Jack | BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J2 |
| 1 | Fuse | Fuseholder_Clip-6.3x32mm_Littelfuse_102071_Inline_P34.70x7.60mm_D2.00mm_Horizontal | F1 |
| 1 | 10k | Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
| 1 | SW_Push_Dual | ST24_SWITCH | SW2 |
| 1 | Transformer_1P_1S | Transformer_166J | T1 |
| 1 | SS34 | D_5W_P10.16mm_Horizontal | D1 |
| 1 | KBP208G | Diode_Bridge_KBP | D2 |
| 1 | LED | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D3 |
| 1 | 47uH | L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L1 |
| 2 | 0.1UF 100uF | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 0.1UF 0.1uF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C3, C4 |
| 1 | 0.1 3300uF | CP_Radial_D16.0mm_P7.50mm | C5 |
| 1 | 22PF 10uF | CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 22PF 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C7 |
| 1 | 1kOhm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10K 220 Ohms | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10K 1kOhms | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
5v PSU design files
The KiCad project lives in the DomAtTheShack/6502-Breadboard-ROM repository on GitHub; these links point at the commit this page was built from.
5v PSU: common questions
How big is the 5v PSU PCB?
The 5v PSU measures 132 × 104.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5v PSU?
21 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 5v PSU design files?
From the DomAtTheShack/6502-Breadboard-ROM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 5v PSU design in my own project?
The repository has no license, so all rights stay with DomAtTheShack. Use it as a reference, and ask the author before reusing the design.
More boards in 6502-Breadboard-ROM
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979