13 open source boards using the WD65C02
Real designs built with the WD65C02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
6502 adapter
hoglet67
49 × 75.2 mm57 parts2LGPL-3.01096502 adapter
hoglet67
49 × 75.2 mm57 parts2LNo license66AVR/Arduino
6502-Computer
The-Invent0r
188.3 × 114.3 mm34 parts2LNo license316502 adapter
sharpie7
49 × 75.2 mm57 parts2LGPL-2.019MOUSE
mkeller0815
138.4 × 74.9 mm21 parts2LMIT146502 adapter
DopierRex
49 × 75.2 mm57 parts2LGPL-3.010AVR/Arduino
6502 Computer
DomAtTheShack
216.6 × 144 mm74 parts2LNo license06502 adapter
hoglet67
49 × 75.2 mm57 parts2LGPL-3.0176502fastbb
gfoot
195.6 × 165.1 mm30 parts2LUnlicense7BE6502
89Mods
139.2 × 112.3 mm60 parts4LMIT3AVR/Arduino
6502 DebugBoard
DomAtTheShack
199.6 × 114.2 mm64 parts2LNo license06502fast3cpu
gfoot
56.5 × 78.7 mm29 parts2LUnlicense75v PSU
DomAtTheShack
132 × 104.5 mm21 parts2LNo license0
How designs wire the WD65C02
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the WD65C02 connects to, and the resistors, capacitors and other passives placed on it.
- The RDY pin has a pull-up to 5V on 8 of 10 designs, most often 22 kΩ (then 4.7 kΩ).
- The IRQ pin has a pull-up to 5V on 8 of 10 designs, most often 22 kΩ (then 4.7 kΩ).
- The NMI pin has a pull-up to 5V on 8 of 9 designs, most often 22 kΩ (then 4.7 kΩ).
- The BE pin has a pull-up to 5V on 7 of 9 designs, most often 22 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RDYpin 2 | Connected to: 74LVC4245 50% |
|
| IRQpin 4 | Connected to: 74LVC4245 50%, a connector 20% |
|
| NMIpin 6 | Connected to: 74LVC4245 56%, a connector 22% |
|
| VCCpin 8 | Connected to: 5V 100% |
|
| GNDpin 21 | Connected to: GND 100% | — |
| NCpin 35 | Connected to: Not connected 100% | — |
| BEpin 36 | Connected to: 74LVC4245 56% · 5V 22% |
|
| PHI2pin 37 | Connected to: 74HC00 22% |
|
| SOpin 38 | Connected to: 74LVC4245 56% · 5V 22% |
|
| RESETpin 40 | Connected to: 74LVC4245 56%, a connector 22% |
|
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 6502 adapter by hoglet67, 6502 adapter by hoglet67, 6502-Computer-PCB by The-Invent0r and 6502 adapter by sharpie7.
The WD65C02 in open source designs
The gallery holds 13 open source boards using the WD65C02 from 10 GitHub repositories; a typical one measures about 132 × 78.7 mm and carries around 57 components.
92% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is 6502 adapter by hoglet67.
Parts used alongside the WD65C02
Microcontrollers on boards using the WD65C02
What boards using the WD65C02 are built for
WD65C02: common questions
Where can I find a WD65C02 reference design?
Each of the 13 boards on this page is a real design using the WD65C02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the WD65C02 RDY pin?
The RDY pin has a pull-up to 5V on 8 of 10 designs, most often 22 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the WD65C02.
What pull-up resistor is used on the WD65C02 IRQ pin?
The IRQ pin has a pull-up to 5V on 8 of 10 designs, most often 22 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the WD65C02.
What pull-up resistor is used on the WD65C02 NMI pin?
The NMI pin has a pull-up to 5V on 8 of 9 designs, most often 22 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the WD65C02.
What parts are used alongside the WD65C02?
The 74LV1T125, 74LVC4245, 28C256, 74HC00 and 6551 appear in the most repositories here.
Which microcontrollers do boards using the WD65C02 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the WD65C02?
The median is 132 × 78.7 mm, and 92% are two-layer designs.
What is the most popular open source board using the WD65C02?
By GitHub stars, 6502 adapter by hoglet67, with 109 stars.
Can I simulate one of these boards using the WD65C02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.