6502 adapter
About the 6502 adapter PCB
6502 adapter is an open source PCB design by DopierRex, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49 × 75.2 mm, with 57 components from 16 distinct parts.
Other key parts include the WD65C02, 74LVC4245 and 74LV1T125. By type, the board carries 20 resistors, 15 capacitors, 9 ICs, 5 diodes, 3 connectors and 2 switches.
It belongs with the retro computing and test & measurement designs in this gallery.
From the project
Add-on set of cores & options for Spectrum Next / N-GO
This project is an open-source In-Circuit Emulator for the 6502, 65C02, Z80, 6809 and 6809E 8-bit processors.
For further details see the GitHub Project Wiki: https://github.com/hoglet67/AtomBusMon/wiki
If you have any questions or feedback, please join in the discussion thread at stardot.org.uk: http://stardot.org.uk/forums/viewtopic.php?f=44&t=9655
Main components on the 6502 adapter
6502 adapter bill of materials (BOM)
57 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WD65C02 | dip40_smt_header | U1 |
| 5 | 74LVC4245 | SOIC-24W_7.5x15.4mm_Pitch1.27mm | U2, U3, U4, U5, U6 |
| 3 | 74LV1T125 | SOT-23-5_HandSoldering | U7, U8, U9 |
| 2 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1, P2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | P3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | LK1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | LK2, LK3 |
| 2 | SW_Push | SW_Tactile_SKHH_Angled | SW1, SW2 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 2 | PMEG3010BEA | D_SOD-323_HandSoldering | D4, D5 |
| 12 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14 |
| 1 | 0 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C15 |
| 12 | 22K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R15, R16 +4 |
| 3 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
| 5 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R12, R13, R14 |
6502 adapter design files
The KiCad project lives in the DopierRex/OneNext repository on GitHub; these links point at the commit this page was built from.
6502 adapter: common questions
How big is the 6502 adapter PCB?
The 6502 adapter measures 49 × 75.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 6502 adapter?
57 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the 6502 adapter design files?
From the DopierRex/OneNext repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 6502 adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which DopierRex chose for the repository.
More boards in OneNext
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
Rgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k