12 open source boards using the 74LV1T125
Real designs built with the 74LV1T125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
6502 adapter
hoglet67
49 × 75.2 mm57 parts2LGPL-3.01096502 adapter
hoglet67
49 × 75.2 mm57 parts2LNo license666502 adapter
sharpie7
49 × 75.2 mm57 parts2LGPL-2.0196502 adapter
DopierRex
49 × 75.2 mm57 parts2LGPL-3.010Raspberry Pi
PiPtr
jmlzone
101.6 × 141.7 mm379 parts4LNo license8NXP
Control rev3
PaulStoffregen
48.3 × 105.4 mm127 parts2LNo license1606809e adapter
hoglet67
49 × 75.2 mm55 parts2LGPL-3.01096809e adapter
hoglet67
49 × 75.2 mm55 parts2LNo license666809e adapter
sharpie7
49 × 75.2 mm55 parts2LGPL-2.0196502 adapter
hoglet67
49 × 75.2 mm57 parts2LGPL-3.0176809e adapter
DopierRex
49 × 75.2 mm55 parts2LGPL-3.0106809e adapter
hoglet67
49 × 75.2 mm55 parts2LGPL-3.017
How designs wire the 74LV1T125
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LV1T125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control rev3 by PaulStoffregen, 6502 adapter by hoglet67, 6502 adapter by hoglet67 and 6502 adapter by sharpie7.
The 74LV1T125 in open source designs
The gallery holds 12 open source boards using the 74LV1T125 from 7 GitHub repositories; a typical one measures about 49 × 75.2 mm and carries around 57 components.
92% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Control rev3 by PaulStoffregen.
Parts used alongside the 74LV1T125
Microcontrollers on boards using the 74LV1T125
What boards using the 74LV1T125 are built for
74LV1T125: common questions
Where can I find a 74LV1T125 reference design?
Each of the 12 boards on this page is a real design using the 74LV1T125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LV1T125 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74LV1T125.
What parts are used alongside the 74LV1T125?
The 74LVC4245, MC6809E and WD65C02 appear in the most repositories here.
Which microcontrollers do boards using the 74LV1T125 use?
Most are built on NXP (1) and Raspberry Pi (1).
How big is a typical board using the 74LV1T125?
The median is 49 × 75.2 mm, and 92% are two-layer designs.
What is the most popular open source board using the 74LV1T125?
By GitHub stars, Control rev3 by PaulStoffregen, with 160 stars.
Can I simulate one of these boards using the 74LV1T125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.