HardLabs

Harmony mark6-carrier

dpaola2·Harmony·hardware/mark-6/carrier-rev-a/harmony-mark6-carrier.kicad_pcb

Harmony mark6-carrier PCB layout, top view — open source board by dpaola2

About the Harmony mark6-carrier PCB

Harmony mark6-carrier is an open source PCB design by dpaola2, published on GitHub. It is a 4-layer board measuring 66.2 × 169 mm, with 36 components from 15 distinct parts.

Other key parts include the TPS62162DSGR. By type, the board carries 21 resistors, 7 capacitors, 5 connectors, 1 IC, 1 fuse and 1 inductor.

It belongs with the rf & radio, iot & wireless and displays & leds designs in this gallery.

From the project

Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared. The assembled carrier remains unordered. A supplier quote request was sen

Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared. The assembled carrier remains unordered. A supplier quote request was sent to PCBWay for DFM review and pricing; the response is pending. Physical mating, cable mapping and powered qualification remain open. The historical design record below retains its original dated assumptions.

Main components on the Harmony mark6-carrier

TPS62162DSGR

Harmony mark6-carrier bill of materials (BOM)

36 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS62162DSGR
TPS62162DSGR / 3.3V
U1
1
SSW-116-01-G-S
Feather JP1 socket
J1
1
SSW-112-01-G-S
Feather JP3 socket
J2
1
FH12-18S-0.5SH(55)
EYESPI ribbon
J3
1
DM3AT-SF-PEJM5
Dedicated microSD
J4
1
SM04B-SRSS-TB(LF)(SN)
ANO #6310 cable
J5
1
MF-NSMF075-2
0.75A hold PTC
F1
1
XFL4020-222MEC
2.2uH
L1
2
C3225X7R1C226M250AC
22uF
C1, C2
3
C0805C104K5RACTU
100nF
C3, C5, C7
2
C2012X7R1A106K125AC
10uF
C4, C6
10
RC0603FR-07100RL
100R
R1, R2, R3, R4, R5, R6, R7, R8 +2
6
RC0603FR-0747KL
47k
R11, R12, R13, R14, R15, R16
3
RC0603FR-0710KL
10k
R17, R18, R19
2
RC0603FR-07100KL
100k
R20, R21

Harmony mark6-carrier design files

The KiCad project lives in the dpaola2/Harmony repository on GitHub; these links point at the commit this page was built from.

Harmony mark6-carrier: common questions

How big is the Harmony mark6-carrier PCB?

The Harmony mark6-carrier measures 66.2 × 169 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Harmony mark6-carrier?

36 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Harmony mark6-carrier design files?

From the dpaola2/Harmony repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Harmony mark6-carrier design in my own project?

The repository has no license, so all rights stay with dpaola2. Use it as a reference, and ask the author before reusing the design.

More boards in Harmony

Similar boards