19 open source boards using the TPS62162DSGR
Real designs built with the TPS62162DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Spikeling
OpenSourceNeuro
120 × 80 mm211 parts2LGPL-3.021MowerBoard
pcailliatte
54 × 120 mm101 parts4LCERN-OHL-S-2.02EEG
MariusFauteux
110 × 85 mm370 parts4LNo license1ESP32
ESP32-Custom
nakul-biovaco
28 × 55 mm42 parts4LMIT1Receiver
JMET04
50 × 42 mm22 parts4LMIT1STM32
Uq phone
JamesB-Wood
45 × 108 mm172 parts6LCERN-OHL-S-2.00STM32
Flightcontroller
ukinori
70 × 100 mm129 parts4LNo license0Pokeboy
cameo-5958
79.4 × 119.4 mm111 parts4LMIT0ESP32
Pot pulse
rwrife
70 × 50 mm41 parts4LMIT0ESP32
Bench breathe
rwrife
65 × 75 mm36 parts2LMIT0STM32
AeroBlinker
toyJig
38.3 × 26.8 mm28 parts2LNo license0- schematic only · 81 parts
Microscout
Normansrule
81 partsNo license0 ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2Harmony mark6-carrier
dpaola2
66.2 × 169 mm36 parts4LNo license0ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2Receiver effects
JMET04
50.3 × 42.3 mm14 parts4LMIT1ESP32
Virtual scoring box
AndrewCraswell
120 × 85 mm142 parts4LMIT0Routed base
dpaola2
66 × 169 mm36 parts4LNo license0ESP32
Lower
sbarisic
70 × 100 mm92 parts2LCustom license2
How designs wire the TPS62162DSGR
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the TPS62162DSGR connects to, and the resistors, capacitors and other passives placed on it.
- The VOS_6 pin has a inductor on 14 of 14 designs, most often 2.2 µH (then 3.3 µH).
- The SW_7 pin has a inductor on 14 of 14 designs, most often 2.2 µH (then 3.3 µH).
- The VIN_2 pin has a capacitor to GND on 12 of 14 designs, most often 10 µF (then 22 µF).
- The FB_5 pin is tied to GND on 14 of 14 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PGND_1pin 1 | Connected to: GND 100% | — |
| VIN_2pin 2 | Connected to: Signal 57% · 5V 43% |
|
| EN_3pin 3 | Connected to: Signal 57% · 5V 43% |
|
| AGND_4pin 4 | Connected to: GND 100% | — |
| FB_5pin 5 | Connected to: GND 100% | — |
| VOS_6pin 6 | Connected to: 3.3V 71% · a signal 29% |
|
| SW_7pin 7 | Connected to: Signal 100% |
|
| PG_8pin 8 | Connected to: Signal 86% |
|
| PAD_9pin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spikeling by OpenSourceNeuro, MowerBoard by pcailliatte, MagMouse by sbarisic and Receiver by JMET04.
The TPS62162DSGR in open source designs
The gallery holds 19 open source boards using the TPS62162DSGR from 15 GitHub repositories; a typical one measures about 66.1 × 90 mm and carries around 92 components.
78% use four copper layers or more, and 53% carry an open source license.
The most starred is Spikeling by OpenSourceNeuro.
Parts used alongside the TPS62162DSGR
What boards using the TPS62162DSGR are built for
TPS62162DSGR: common questions
Where can I find a TPS62162DSGR reference design?
Each of the 19 boards on this page is a real design using the TPS62162DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS62162DSGR VOS_6 pin connected?
The VOS_6 pin has a inductor on 14 of 14 designs, most often 2.2 µH (then 3.3 µH). Counted from the KiCad layouts of 14 open source designs using the TPS62162DSGR.
How is the TPS62162DSGR SW_7 pin connected?
The SW_7 pin has a inductor on 14 of 14 designs, most often 2.2 µH (then 3.3 µH). Counted from the KiCad layouts of 14 open source designs using the TPS62162DSGR.
How is the TPS62162DSGR VIN_2 pin connected?
The VIN_2 pin has a capacitor to GND on 12 of 14 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 14 open source designs using the TPS62162DSGR.
What parts are used alongside the TPS62162DSGR?
The USBLC6-2SC6, ICM-42688-P, MAX98357AETE+T, SHT40-AD1B-R2 and TLV9001IDBVR appear in the most repositories here.
Which microcontrollers do boards using the TPS62162DSGR use?
Most are built on ESP32 (8) and STM32 (3).
How big is a typical board using the TPS62162DSGR?
The median is 66.1 × 90 mm, and 22% are two-layer designs.
What is the most popular open source board using the TPS62162DSGR?
By GitHub stars, Spikeling by OpenSourceNeuro, with 21 stars.
Can I simulate one of these boards using the TPS62162DSGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.