Faceplate before
About the Faceplate before PCB
Faceplate before is an open source PCB design by dpaola2, published on GitHub. It is a 2-layer board measuring 52 × 94.2 mm, with 22 components from 13 distinct parts.
Other key parts include the AT42QT2120-MMH and DRV2605LDGST. By type, the board carries 9 resistors, 5 capacitors, 3 switches, 2 ICs, 1 transistor and 1 connector.
It belongs with the power & battery and audio designs in this gallery.
Main components on the Faceplate before
Faceplate before bill of materials (BOM)
22 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT42QT2120-MMH AT42QT2120 | VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm | U1 |
| 1 | DRV2605LDGST DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | PJC138K_R1_00001 PJC138K | SOT-323_SC-70 | Q1 |
| 1 | GT-F0509SR15-15SMT01 MB Connector | G-Switch GT-F0509SR15-15SMT01 | J4 |
| 1 | JD-T1800 | JD-T1800 | LCD1 |
| 1 | JS102011SAQN BUTTON | qtouch-button | SW1 |
| 1 | EVQ-P40B3M WHEEL | qtouch-wheel | SW2 |
| 1 | EVQ-P40B3M GUARD | qtouch-guard | SW3 |
| 1 | GCM188R71C104KA37J 0.1uF | C_0603_1608Metric | C1 |
| 1 | GRM319R61C226KE15D 22uF | C_1206_3216Metric | C2 |
| 3 | GRM216R61C105KA88D 1uF | C_0805_2012Metric | C3, C4, C5 |
| 8 | AC0603JR-0710KL 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R9 |
| 1 | AC0603FR-131ML 1M | R_0603_1608Metric | R8 |
Faceplate before design files
The KiCad project lives in the dpaola2/Harmony repository on GitHub; these links point at the commit this page was built from.
Faceplate before: common questions
How big is the Faceplate before PCB?
The Faceplate before measures 52 × 94.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Faceplate before?
22 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Faceplate before design files?
From the dpaola2/Harmony repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Faceplate before design in my own project?
The repository has no license, so all rights stay with dpaola2. Use it as a reference, and ask the author before reusing the design.
More boards in Harmony
ESP32Tangara mainboard
52 × 94.2 mm95 parts4LNo license0
Routed base
66 × 169 mm36 parts4LNo license0
Harmony mark6-carrier
66.2 × 169 mm36 parts4LNo license0
Tangara faceplate
52 × 94.2 mm22 parts2LNo license0
Faceplate refilled native
52 × 94.2 mm22 parts2LNo license0
Faceplate net aware before refill
52 × 94.2 mm22 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k