Esp32-marine sensorhub v2
dpmcgarry·esp32-marine-sensorhub-v2·hardware/mshv2/mshv2.kicad_pcb
About the Esp32-marine sensorhub v2 PCB
Esp32-marine sensorhub v2 is an open source ESP32 PCB design by dpmcgarry, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board, with 40 components from 14 distinct parts.
Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the LM2596S-3.3, MCP6004 and AMS1117-3.3. By type, the board carries 5 ICs, 4 capacitors and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
V2 of the MSH
A WiFi-enabled multi-sensor board designed for marine applications, featuring temperature monitoring, humidity sensing, current measurement, and dashboard I/O capabilities for remote indicators and controls.
The Marine Sensor Hub is a compact, ruggedized sensor platform built around the ESP32-C6 microcontroller. It's designed to monitor critical systems on boats and marine vessels, providing real-time data over WiFi 6 to a central server via MQTT.
Main components on the Esp32-marine sensorhub v2
Esp32-marine sensorhub v2 bill of materials (BOM)
40 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-3.3 | TO-263-5_TabPin3 | U1 |
| 2 | MCP6004 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | ESP32-C6-WROOM-1-N8 | ESP32-C6-WROOM-1 | U4 |
| 8 | 0.1uF | C_0201_0603Metric | C_EN1, C_FILT_1, C_FILT_2, C_FILT_3, C_FILT_4, C_FILT_5, C_FILT_E_1, C_FILT_E_2 |
| 2 | 5.1k | R_0201_0603Metric | R_CC1, R_CC2 |
| 5 | 10k | R_0201_0603Metric | R_DIV1_1, R_DIV1_2, R_DIV1_3, R_DIV1_4, R_DIV1_5 |
| 5 | 20k | R_0201_0603Metric | R_DIV2_1, R_DIV2_2, R_DIV2_3, R_DIV2_4, R_DIV2_5 |
| 10 | 1k | R_0201_0603Metric | R_FILT_1, R_FILT_2, R_FILT_3, R_FILT_4, R_FILT_5, R_SER_1, R_SER_2, R_SER_3 +2 |
| 1 | MBRS340 | D_SMC | D1 |
| 1 | 100uF/25V | C_0201_0603Metric | C1 |
| 1 | 100uF/10V | C_0201_0603Metric | C2 |
| 1 | 10uF | C_0201_0603Metric | C3 |
| 1 | 0.1uF | C_0201_0603Metric | C4 |
Esp32-marine sensorhub v2 design files
The KiCad project lives in the dpmcgarry/esp32-marine-sensorhub-v2 repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/mshv2/mshv2.kicad_pcb
- Schematichardware/mshv2/mshv2.kicad_sch
Esp32-marine sensorhub v2: common questions
What microcontroller does the Esp32-marine sensorhub v2 use?
The Esp32-marine sensorhub v2 is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.
How big is the Esp32-marine sensorhub v2 PCB?
The Esp32-marine sensorhub v2 has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-marine sensorhub v2?
40 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-marine sensorhub v2 design files?
From the dpmcgarry/esp32-marine-sensorhub-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-marine sensorhub v2 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which dpmcgarry chose for the repository.
Can I test firmware for the Esp32-marine sensorhub v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k