Artemis
About the Artemis PCB
Artemis is an open source PCB design by dragonlock2, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 22.8 × 33.4 mm, with 37 components from 24 distinct parts.
Other key parts include the CP2102N-A02-GQFN20, SparkfunArtemis and MIC5365-3.3YC5. By type, the board carries 13 capacitors, 11 resistors, 4 diodes, 3 ICs, 3 connectors and 1 crystal.
From the project
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
Breakout for the Sparkfun Artemis. I tried to make the PCB at home and failed so I made a much smaller one and sent that to OSHPark.
Main components on the Artemis
Artemis bill of materials (BOM)
37 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-A02-GQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm | U1 |
| 1 | SparkfunArtemis | ARTEMIS_FP | U2 |
| 1 | MIC5365-3.3YC5 | SOT-353_SC-70-5 | U3 |
| 1 | 32.768kHz | Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | Left | PinHeader_2x13_P2.54mm_Vertical | J3 |
| 1 | Right | PinHeader_2x13_P2.54mm_Vertical | J4 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | RST | SW_SPST_PTS810 | SW1 |
| 1 | RX | LED_0603_1608Metric | D1 |
| 1 | TX | LED_0603_1608Metric | D2 |
| 1 | LED | LED_0603_1608Metric | D3 |
| 1 | PWR | LED_0603_1608Metric | D4 |
| 5 | 0.1u | C_0603_1608Metric | C1, C6, C7, C8, C13 |
| 2 | 10u | C_0603_1608Metric | C2, C4 |
| 3 | 1u | C_0603_1608Metric | C3, C5, C12 |
| 1 | 1n | C_0603_1608Metric | C9 |
| 2 | 20p | C_0603_1608Metric | C10, C11 |
| 1 | 22k | R_0603_1608Metric | R1 |
| 1 | 47k | R_0603_1608Metric | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1k | R_0603_1608Metric | R3, R4, R5, R8, R9 |
| 1 | 220k | R_0603_1608Metric | R6 |
| 1 | 100k | R_0603_1608Metric | R7 |
| 2 | 5.1k | R_0603_1608Metric | R10, R11 |
Artemis design files
The KiCad project lives in the dragonlock2/kicadboards repository on GitHub; these links point at the commit this page was built from.
Artemis: common questions
How big is the Artemis PCB?
The Artemis measures 22.8 × 33.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Artemis?
37 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Artemis design files?
From the dragonlock2/kicadboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Artemis design in my own project?
Yes, under the terms of its Apache-2.0 license, which dragonlock2 chose for the repository.
More boards in kicadboards
AVR/ArduinoKeyboard
200 × 100 mm225 parts2LApache-2.013
RISC-VAdin1100 podl
72 × 24 mm125 parts2LApache-2.013
FPGARvice adc
44 × 27 mm124 parts2LApache-2.013
AVR/ArduinoWord watch
36 × 36 mm122 parts2LApache-2.013
NXPLpc1768 poe
69 × 23 mm116 parts4LApache-2.013
STM32Stm32 esc
36 × 59 mm106 parts2LApache-2.013
AVR/ArduinoPsu monitor
67 × 28 mm94 parts2LApache-2.013
NXPJABICAN-USB Pro
70.3 × 38 mm91 parts2LApache-2.013
Ft4232h
43 × 20 mm67 parts2LApache-2.013
Silicon LabsEfm32wg
32 × 32 mm61 parts2LApache-2.013