Adin1100 podl
About the Adin1100 podl PCB
Adin1100 podl is an open source RISC-V PCB design by dragonlock2, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 72 × 24 mm, with 125 components from 43 distinct parts.
Its main chip is the CH32V003FxUx, from the RISC-V family. Other key parts include the ADIN1100, XDS_TX4137, MIC5365-3.3YC5 and RTL8201F-VB-CG. By type, the board carries 45 resistors, 41 capacitors, 21 diodes, 5 ICs, 5 inductors and 4 connectors.
From the project
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
10BASE-T1L to 10BASE-T media converter and testing discrete PoE negotiation and passive PoDL.
Main components on the Adin1100 podl
Adin1100 podl bill of materials (BOM)
125 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADIN1100 | QFN-40-1EP_6x6mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | XDS_TX4137 | SOT-23-6 | U2 |
| 1 | MIC5365-3.3YC5 | SOT-353_SC-70-5 | U3 |
| 1 | RTL8201F-VB-CG | QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U4 |
| 1 | CH32V003FxUx | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U5 |
| 1 | HL6003 | SOT-23 | Q1 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02_MountingPin | Molex_DuraClik_RH_2pin | J1 |
| 1 | USB_B_Micro | USB_Micro-B_U254-05 | J2 |
| 1 | SWIO | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | RC02535 | RJ45_Amphenol_RJHSE538X | J4 |
| 1 | JS202011JAQN | JS202011JAQN | SW1 |
| 1 | B1601S | Transformer_Ethernet_Bourns_PT61017PEL | TR1 |
| 4 | ~ | LED_0402_1005Metric | D1, D2, D20, D21 |
| 13 | 0.5A | D_SOD-123F | D3, D4, D5, D6, D8, D12, D13, D14 +5 |
| 1 | EAST1005BA0 | LED_0402_1005Metric | D7 |
| 1 | 27V | D_DO-35_SOD27_P7.62mm_Horizontal | D9 |
| 1 | 15V | D_DO-35_SOD27_P7.62mm_Horizontal | D10 |
| 1 | rgb | R_Array_Convex_2x0606 | D11 |
| 2 | FerriteBead_Small | L_0402_1005Metric | FB1, FB2 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DLW43SH101XK2 | L_CommonModeChoke_Murata_DLW43SH101 | L1, L2 |
| 1 | 120u | L_Changjiang_FNR4030S | L3 |
| 2 | 220n | C_0603_1608Metric | C1, C2 |
| 2 | 10p | C_0402_1005Metric | C3, C4 |
| 16 | 100n | C_0402_1005Metric | C5, C7, C10, C16, C20, C22, C24, C25 +8 |
| 4 | 1u | C_0402_1005Metric | C6, C9, C15, C17 |
| 7 | 10n | C_0402_1005Metric | C8, C12, C14, C36, C38, C39, C41 |
| 1 | 10u | CP_Elec_6.3x5.4 | C11 |
| 1 | 1u | C_1206_3216Metric | C13 |
| 2 | 10u | C_0805_2012Metric | C18, C19 |
| 1 | 4u7 | C_0402_1005Metric | C21 |
| 1 | 100n | C_0603_1608Metric | C23 |
| 2 | 20p | C_0402_1005Metric | C31, C33 |
| 2 | 1n | C_1206_3216Metric | C37, C40 |
| 21 | 10k | R_0402_1005Metric | R1, R2, R7, R8, R9, R11, R15, R17 +13 |
| 6 | 49.9 | R_0402_1005Metric | R3, R6, R34, R35, R36, R37 |
| 2 | 5k1 | R_0402_1005Metric | R4, R5 |
| 3 | 100k | R_0402_1005Metric | R10, R14, R25 |
| 6 | 22k | R_0603_1608Metric | R12, R16, R18, R19, R20, R21 |
| 1 | 22k | R_0402_1005Metric | R13 |
| 1 | 24k9 | R_0603_1608Metric | R29 |
| 1 | 2k49 | R_0402_1005Metric | R33 |
| 4 | 75 | R_0402_1005Metric | R42, R43, R44, R45 |
Adin1100 podl design files
The KiCad project lives in the dragonlock2/kicadboards repository on GitHub; these links point at the commit this page was built from.
Adin1100 podl: common questions
What microcontroller does the Adin1100 podl use?
The Adin1100 podl is built around the CH32V003FxUx, from the RISC-V family.
How big is the Adin1100 podl PCB?
The Adin1100 podl measures 72 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adin1100 podl?
125 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adin1100 podl design files?
From the dragonlock2/kicadboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adin1100 podl design in my own project?
Yes, under the terms of its Apache-2.0 license, which dragonlock2 chose for the repository.
Can I test firmware for the Adin1100 podl without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in kicadboards
AVR/ArduinoKeyboard
200 × 100 mm225 parts2LApache-2.013
FPGARvice adc
44 × 27 mm124 parts2LApache-2.013
AVR/ArduinoWord watch
36 × 36 mm122 parts2LApache-2.013
NXPLpc1768 poe
69 × 23 mm116 parts4LApache-2.013
STM32Stm32 esc
36 × 59 mm106 parts2LApache-2.013
AVR/ArduinoPsu monitor
67 × 28 mm94 parts2LApache-2.013
NXPJABICAN-USB Pro
70.3 × 38 mm91 parts2LApache-2.013
Ft4232h
43 × 20 mm67 parts2LApache-2.013
Silicon LabsEfm32wg
32 × 32 mm61 parts2LApache-2.013
Artemis
22.8 × 33.4 mm37 parts2LApache-2.013
Similar boards
RISC-VWorkbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0129
RISC-VKeytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105
RISC-VCh32v003f4u6 with wsled
40.6 × 44.5 mm26 parts2LMIT105
RISC-VFroggyswadge
81.5 × 72.2 mm92 parts2LMIT105
RISC-VNorthPoleCircuit
Janky-Jingle-Crew
150 × 110 mm46 parts4LNo license62
RISC-VOsc sg90-v006
OpenServoCore
20.6 × 9.6 mm26 parts4LApache-2.034