14 open source boards using the CP2102N-A02-GQFN20
Real designs built with the CP2102N-A02-GQFN20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Silicon Labs
M2SmartHome
lukasznowarkiewicz
22 × 80 mm239 parts6LNo license2ESP32
Iot esp32-hw
sourabh-devrukhkar
89.9 × 52.8 mm85 parts4LMIT1ESP32
ESP32-IoT-Development-Board
riteshsalikeripatil
88.7 × 55.6 mm85 parts4LMIT1EnchantiW106
aburt2
62.2 × 25.4 mm61 parts2LMIT1I.MX 6ULL Bare Bones
a1wolfe
139.7 × 88.9 mm502 parts6LNo license0ESP32
Ekspander 100x i2c
kanaboid
500 × 108.8 mm264 parts4LNo license0STM32
OSBAMS Rev2 RC1
hle12345
100 × 90 mm115 parts4LMIT0ESP32
ESP32 sensor board
D76X
89.9 × 52.8 mm85 parts4LNo license0ESP32
Revision-Project-4 layer-PCB-with
Waqar-98
89.9 × 52.8 mm84 parts4LNo license0ESP32
Wmc sensor proto
gfschwengle
85.3 × 48.3 mm76 parts4LNo license0ESP32
ESP32 sensor board
rompasaurus
89.9 × 52.8 mm85 parts4LNo license2ESP32
ESP32 4 layers
Chirag-Vadrali
88.7 × 55.6 mm85 parts4LNo license1ESP32
ESP32 sensor board
kanaboid
89.9 × 52.8 mm85 parts4LNo license0Artemis
dragonlock2
22.8 × 33.4 mm37 parts2LApache-2.013
How designs wire the CP2102N-A02-GQFN20
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CP2102N-A02-GQFN20 connects to, and the resistors, capacitors and other passives placed on it.
- The VBUS pin has a resistor to GND on 12 of 13 designs, most often 47.5 kΩ (then 47 kΩ).
- The VDD pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF).
- The VREGIN pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF).
- The VBUS pin has a pull-up to VBUS on 11 of 13 designs, most often 22.1 kΩ (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RS485/GPIO.1pin 1 | Connected to: Not connected 100% | — |
| CLK/GPIO.0pin 2 | Connected to: Not connected 100% | — |
| GNDpin 3, 12, 21 | Connected to: GND 100% | — |
| VDDpin 6 | Connected to: 3.3V 85% · a signal 15% |
|
| VREGINpin 7 | Connected to: 3.3V 85% · a signal 15% |
|
| VBUSpin 8 | Connected to: Signal 100% |
|
| RSTpin 9 | Connected to: Signal 100% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SUSPENDpin 11, 14 | Connected to: Not connected 100% | — |
| WAKEUPpin 13 | Connected to: Not connected 100% | — |
| CTSpin 15 | Connected to: Signal 77% · not connected 23% |
|
| RTSpin 16 | Connected to: Signal 85% · not connected 15% |
|
| RXT/GPIO.3pin 19 | Connected to: Signal 85% · not connected 15% |
|
| TXT/GPIO.2pin 20 | Connected to: Signal 85% · not connected 15% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Artemis by dragonlock2, M2SmartHome by lukasznowarkiewicz, ESP32 sensor board by rompasaurus and EnchantiW106 by aburt2.
The CP2102N-A02-GQFN20 in open source designs
The gallery holds 14 open source boards using the CP2102N-A02-GQFN20 from 13 GitHub repositories; a typical one measures about 89.9 × 52.8 mm and carries around 85 components.
86% use four copper layers or more, and 36% carry an open source license.
The most starred is Artemis by dragonlock2.
Parts used alongside the CP2102N-A02-GQFN20
Microcontrollers on boards using the CP2102N-A02-GQFN20
What boards using the CP2102N-A02-GQFN20 are built for
CP2102N-A02-GQFN20: common questions
Where can I find a CP2102N-A02-GQFN20 reference design?
Each of the 14 boards on this page is a real design using the CP2102N-A02-GQFN20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the CP2102N-A02-GQFN20 VBUS pin?
The VBUS pin has a resistor to GND on 12 of 13 designs, most often 47.5 kΩ (then 47 kΩ). Counted from the KiCad layouts of 13 open source designs using the CP2102N-A02-GQFN20.
What decoupling capacitors do designs use on the CP2102N-A02-GQFN20 VDD pin?
The VDD pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the CP2102N-A02-GQFN20.
What decoupling capacitors do designs use on the CP2102N-A02-GQFN20 VREGIN pin?
The VREGIN pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the CP2102N-A02-GQFN20.
What parts are used alongside the CP2102N-A02-GQFN20?
The USBLC6-2SC6, BME280, ESP32-C3-WROOM-02-H4, LM1117MPX-3.3/NOPB and W25Q32JVSSIQ appear in the most repositories here.
Which microcontrollers do boards using the CP2102N-A02-GQFN20 use?
Most are built on ESP32 (9), Silicon Labs (1) and STM32 (1).
How big is a typical board using the CP2102N-A02-GQFN20?
The median is 89.9 × 52.8 mm, and 14% are two-layer designs.
What is the most popular open source board using the CP2102N-A02-GQFN20?
By GitHub stars, Artemis by dragonlock2, with 13 stars.
Can I simulate one of these boards using the CP2102N-A02-GQFN20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.