SMeter Daughter Board v1
About the SMeter Daughter Board v1
SMeter Daughter Board v1 is an open source PCB design by drajnauth, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 49.6 × 31.7 mm, with 23 components from 16 distinct parts.
Other key parts include the TL072 and ICL7660. By type, the board carries 10 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
Phoenix 612 Transceiver Board
This is the updated Dueling 612 Tranceiver. It contains the KiCad schematic and pcb files as well as other design artifacts.
The project has been renamed to Phoenix612
Main components on the SMeter Daughter Board v1
SMeter Daughter Board v1 bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm_Socket | U1 |
| 1 | ICL7660 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AFin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Smeter | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 4 | 10u | C_1206_3216Metric | C1, C2, C7, C9 |
| 1 | .22u | C_1206_3216Metric | C3 |
| 3 | 100n | C_1206_3216Metric | C4, C8, C10 |
| 2 | 10u | CP_Radial_D8.0mm_P2.50mm | C5, C6 |
| 1 | 2.2K | R_1206_3216Metric | R1 |
| 1 | 510K | R_1206_3216Metric | R2 |
| 1 | 100K | R_1206_3216Metric | R3 |
| 1 | 200R | R_1206_3216Metric | R4 |
| 2 | 220R | R_1206_3216Metric | R5, R6 |
SMeter Daughter Board v1 design files
The KiCad project lives in the drajnauth/Phoenix612 repository on GitHub; these links point at the commit this page was built from.
SMeter Daughter Board v1: common questions
How big is the SMeter Daughter Board v1?
The SMeter Daughter Board v1 measures 49.6 × 31.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SMeter Daughter Board v1?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SMeter Daughter Board v1 design files?
From the drajnauth/Phoenix612 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SMeter Daughter Board v1 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in Phoenix612
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372